Search found 226 matches
- Sat May 18, 2024 4:40 am
- Forum: Engine
- Topic: crankcase ventilation
- Replies: 14
- Views: 2733
Re: crankcase ventilation
Hague’s, Ithink you are right, the oil fill tube acts as an oil separator. The problems are (a) any water that condenses out also goes back into the sump, and (b) there is not enough airflow through the crankcase to flush out the water vapor. I think the big challenge to adding using a PCV system wo...
- Thu May 16, 2024 7:11 pm
- Forum: Electrical
- Topic: Battery going dead
- Replies: 10
- Views: 2233
Re: Battery going dead
Well all back together and working fine. For somebody else doing this, it is not very hard. I suggest buying new spade terminals and installing them rather than putting one of those SAV pigtails on. The trick for getting the main harness connector apart us to use some small needle nose pliers to gra...
- Wed May 15, 2024 8:18 pm
- Forum: Engine
- Topic: Hard starting hot
- Replies: 9
- Views: 6230
Re: Hard starting hot
If I leave it off just a minute or two it is fine. If I leave it off an hour it is fine. In between it is likely to be balky.
- Tue May 14, 2024 8:25 pm
- Forum: Engine
- Topic: Truck died
- Replies: 6
- Views: 2927
Re: Truck died
I kept getting issues with the “good used” pump. Put a new one and and all is good agsin
- Tue May 14, 2024 7:58 pm
- Forum: Engine
- Topic: crankcase ventilation
- Replies: 14
- Views: 2733
Re: crankcase ventilation
Here is a long diatribe about crankcase ventilation. It looks like systems like the Pinz’s are common on lawn mower engines. https://en.wikipedia.org/wiki/Crankcase ... ion_system
- Tue May 14, 2024 7:41 pm
- Forum: Engine
- Topic: crankcase ventilation
- Replies: 14
- Views: 2733
Re: crankcase ventilation
I saw this thread pop up and found out I started years ago! Is there a consensus that the crankcase is vented in only one spot, that there is no circulation to flush out blow by from the crankcase? Do others think that is weird?
- Tue May 14, 2024 7:33 pm
- Forum: Electrical
- Topic: Battery going dead
- Replies: 10
- Views: 2233
Re: Battery going dead
Just about finished. Replacing the spade terminals and female molenex is pretty easy, cheaper, and probably better than splicing in that pigtail you can get from SAV. If someone has a suggestion for a crimping tool for those factory crimp connector I would appreciate it. Mine was obviously not the r...
- Mon Apr 29, 2024 7:58 pm
- Forum: Electrical
- Topic: Battery going dead
- Replies: 10
- Views: 2233
Re: Battery going dead
I am finally getting around to changing the connector and am hoping somebody who has done so can give me some pointers. I bought the wire set that goes from the alternator to the cowl and the molenex connector and spade terminal to change out the piece on the main harness. To get to the alternator t...
- Fri Apr 26, 2024 7:24 am
- Forum: General chat
- Topic: Carb rebuild shop?
- Replies: 2
- Views: 241
Carb rebuild shop?
I have splurged and bought two new carbs for my Pinz. My old ones worked okay but not perfect. They seeped a little gas and I suspect they are responsible for a hot restart problem. I suspect there is a little warpage of the castings and wear of parts that do not come in rebuild kits. I am sure they...
- Sat Aug 26, 2023 8:16 pm
- Forum: General chat
- Topic: 8 wheel pinz
- Replies: 1
- Views: 1503
8 wheel pinz
Has anybody built a Pinz with more than 6 wheels? I know Tatra built some trucks on the same principle with two steering axles and two rear axles, maybe more.
- Fri Aug 11, 2023 3:40 pm
- Forum: Electrical
- Topic: Battery going dead
- Replies: 10
- Views: 2233
Re: Battery going dead
Thanks RMEL. I hit the connector with some elecroclean as it was the only thingI could find. Got it surprisingly clean. I plugged it back in and cranked it up and the voltage went way up, like 39 volts according to my meter. I unplugged and replugged a few times and it was showing 28.something when ...
- Wed Aug 09, 2023 7:13 pm
- Forum: Electrical
- Topic: Battery going dead
- Replies: 10
- Views: 2233
Battery going dead
My batteries are going dead on my 710. I checked the voltage at the batteries and it does not rise with engine running. I opened up the Molinex connector that goes to the alternator and there is quite a bit of corrosion in there, probably my problem. I will replace it when I have time or have to, bu...
- Tue Jul 11, 2023 6:15 pm
- Forum: Electrical
- Topic: 4 WD light
- Replies: 4
- Views: 4712
Re: 4 WD light
I grounded the terminal going to the switch at the bulb socket and the bulb lit. Did not try grounding at the switch itself, so maybe it is wire, but probably not. Done with maintenance and repairs for now and back to the grind. Going to car wash and pressure wash down there before I get back to it....
- Mon Jul 10, 2023 7:17 pm
- Forum: Electrical
- Topic: 4 WD light
- Replies: 4
- Views: 4712
4 WD light
My 4 WD light is not working. Truck goes into 4WD but light does not come on. I seem to recall changing the bulb to no effect. I was under truck today and decided to look at switch. I pulled cover off. Thought switch would come with it but it didn’t. Could not see in there due to muffler. How does s...
- Mon Jul 10, 2023 7:00 pm
- Forum: Engine
- Topic: Hard starting hot
- Replies: 9
- Views: 6230
Re: Hard starting hot
Did not think of that.