THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

Here is what I came up with. I decided to just use the standard indicator cutout for now and might change it up again in the future.

I talked to them and this is what they said.. "Thanks so much for your email and interest in Spyderlock Wheels. We do have it listed on the website, however we need to remove it. Technically the wheel will fit but upon further examination we have discovered multiple issues with clearance, brake...

Are there any beadlock wheels for the 710/712?

I could get some made up if anyone wants to provide the dimensions needed.

Haggerty is great unless you want to actually use the vehicle. It must be stored inside and not used offroad in order for them to insure it.. whats the point of having a Pinz..

Would anyone else be interested in something like this? http://www.newvintageusa.com/images/91017-01.jpg I am going to do something along these lines but for just me I probably will not worry about making it fit the stock dash plate but if others are interested then we might consider a group buy. We...

Do they sell them for the Pinz?

So far the only wheels I have found are Cepek at over $500 a wheel or Spyderlock who does not answer phone or E-mails.

There are many threads about it but if it should say Lami if it is. Also if it has dimples on one end then it is not. Or you can pull back the weatherstrip and look to see if it is layered or not.

I did not post a link as the site was down. I am not sure the "guts only" will work but if someone tries it then post it up.. Here is the link for the one I ordered. http://www.airheadparts.com/vintage-vw-parts/0/switch-turn-signal-lever-w-housing-211953513-g I also forgot to mention that ...

I ordered a new turn signal switch 211953513G from Airhead parts. Here is the wiring layout for it. Switch - Pinz brown wire - ground 1 to 2 butt connectors black w/white stripe - Black w/white stripe black w/green stripe - black w/green stripe 5 terminal butt connector yellow w/black stripe - Black...

Found some more info.. In the parts book it lists the fuel sender as VDO 224.817/008/002 so I googled that and there was one listing for a german (I think) PDF from VDO. http://www.thecustomsabershop.com/images/vdofuelsender.jpg This shows the sender as 13" long (331mm) a with a range of 2.2 oh...

Good info.. Did you ask if they have any other service bulletins?

Was messing around with my fuel gauge and sender today as I am installing a digital gauge and figured I would share some info I found. First off my VDO sender specs.. 5 ohms Full 87 ohms Empty Mounting Flange is 2.8" OD Mounting holes on 2-1/8" diameter (54mm) and has 5 holes. 13" Lon...

I removed the kneepad which definitely helped. I also tried to lift the panel up but hit the steering wheel so I might try removing that next.

Can anyone explain how the funky fasters around the outside are supposed to work? Mine just pulled straight out.

Is there a easy way to get to the gauge wires, etc or does everyone just do a contortionist act to get to them?