THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

John First you need to identify the version of starter you have. http://members.westnet.com.au/profpinz/hold/Starter-Comparison_small.jpg the left device on the pic is version 2, the right one version 1 From the info in your signature ( 1971) I conclude you will have a v1, unless it was swapped in t...

If that was the Albersdorf facility, they restore mainly for use...
and they look after all steyr vehicles, including the g-wagon, which was initially the steyr-puch g-wagon

My Pinz works fine with the Fuel Pump PIERBURG - Ref.: 7.02242.04.0 from a Volkswageen Beetle.
It has exactly the same geometry as the original Pinz pump, but cost just around 50 €.

Taken from http://pinzforum.kiruna.de/viewtopic.php?f=4&t=4912

waterdog wrote:sooo. where is the lubrication coming from for this speedo gear????

speedo gear takes a little grease when assembled, and is not connected to the oil of the diff

Folks If there is still a need ... There is a 710M with snow plough for auction at the Dorotheum https://fahrzeuge.dorotheum.com/auktionen/aktuelle-auktionen/list-lots-detail/lotID/99/lot/1965551-lkw-steyr-daimler-puch-pinzgauer-710m-4-x-4-mit-frontschneepflug-kahlbacher.html?sitesource=kfz&sear...

Replacing o rings and washer will not be enough, I'm afraid.

There is a large o ring behind the RELAY SHAFT HOUSING Art-Nr 7101433151
if you find oil there you must find the source, and I guess you will have a leaking shaft seal ring behind the speedometer pinion.

short answer: I had my drums sandblasted, and then I used a heat resisting "oven paint" that is said to last up to 600 °C. I used masking tape for the contact area with the rim; and covered the whole rear opening with a piece of paperboard.Then I painted the drums with a brush to "rub...

Folks

I got the European dimensions from an Austrian webshop

Haflinger translation calls them bearing washers too I thought I was missing something but it is either just the translation for shim or they are "bearing" the weight as previously stated by Hotzenplotz the top shim is bearing the weight of all moving parts in the steering mechanism... ha...

Hi waterdog let us refer to a picture from the manufacturer http://up.picr.de/23467089yx.jpg from http://www.puch.at/en/spare-parts/pinzgauer-petrol-710-712/steering/steering-link-steering-damper/ here you find items 10 and 22 called brag link; sav has these items as idler arm. they are held togethe...

looking at the dimensions of the cat, it could fit in between the exhaust manifold and the heat exchanger, but in this setup you would need two cat modules....

can you please tell us the source of your catalyst

4x4Pinz thanks for the pics. I guess I will add the nylon straps to the agenda for the winter modifications It seems to me you still use 16 mm diameter screws on both sides of the axle to attach shock absorber and straps. http://up.picr.de/23454681uy.jpg there was a refit note that included drilling...

Could you please post a pic how it looks like with two straps installed ?
How to you prevent them from chafing on the wheels ?
The originals have to bo mounted slightly inwards, so the fold properly...

That is an ex - firebrigade Volkswagen Lt 40 from Austria. On pic 7 of the ad you see the green technical inspection sticker on the windscreen. it basically has the same six cylinder turbo diesel engne as 716 and 718 pinzgauers. Some rare models were equipped with petrol engines, like this one. And ...

Folks I have been to the Oldtimer fair in Salzburg und have attended the Pinzgauer auction. Here they are waiting for their new owners. http://up.picr.de/23439496qb.jpg I have thoroughly inspected Pinzgauer 404 http://up.picr.de/23441427tt.jpg Pinzgauer with Oldtimer certificate have been converted ...