Search found 334 matches
- Sun Feb 04, 2024 7:11 pm
- Forum: Engine
- Topic: Starter sometimes fails to engage
- Replies: 20
- Views: 3136
Re: Starter sometimes fails to engage
Starter is out and on the bench. Tips for anyone else removing a starter: - Disconnect battery (just to be safe) - Remove engine oil dipstick assembly (two bolts), and insert loose a 3/8in bolt into the hole as a cover to keep debris out. - Get the top nut off with a 19mm crow's foot wrench. It'll b...
- Sat Feb 03, 2024 3:44 pm
- Forum: Engine
- Topic: Starter sometimes fails to engage
- Replies: 20
- Views: 3136
Re: Starter sometimes fails to engage
Are there any best practices or tips folks would recommend for pulling the starter, ones that aren't obvious?
- Wed Jan 31, 2024 10:59 pm
- Forum: Engine
- Topic: Starter sometimes fails to engage
- Replies: 20
- Views: 3136
Re: Starter sometimes fails to engage
Thanks for the tip on a starter shop! Next step is to get it pulled out...
- Sun Jan 28, 2024 11:32 pm
- Forum: Engine
- Topic: Starter sometimes fails to engage
- Replies: 20
- Views: 3136
Re: Starter sometimes fails to engage
Yes, ring gear seems fine. Inspected it when I had the flywheel off. Starter teeth also looked fine at the time, and was advised that it maybe just needed lubrication. And it doesn't seem to be a ring-gear issue in that the crankshaft doesn't change position between the no-engage cycle and the subse...
- Sat Jan 27, 2024 11:25 pm
- Forum: Engine
- Topic: Starter sometimes fails to engage
- Replies: 20
- Views: 3136
Starter sometimes fails to engage
Sometime the starter will spin and not engage. Could be as often as 50% of the time, but nearly always engages on second press of the starter button. Always makes a "clunk" when the starter spins down after a failed-engagement start attempt. I lubed it as best I could when I had the transm...
- Mon Jan 22, 2024 11:14 am
- Forum: General chat
- Topic: Michigan registration
- Replies: 0
- Views: 1942
Michigan registration
On first attempt, Michigan has rejected registration of a 710k. They want to say it's off road only. Can someone help with their experience of registering in that state? It seems to be an issue of classification.
Any help would be appreciated!
Any help would be appreciated!
- Sat Jan 20, 2024 10:20 am
- Forum: Electrical
- Topic: 12v rpm gauge on 24v ?
- Replies: 3
- Views: 1416
Re: 12v rpm gauge on 24v ?
I can't speak for the VDO gauges, but I wanted to add that some sold-as-12V gauges may be just fine in a 24V system.
I had an old Sun Super Tach II of similar vintage to the Pinz, and reverse-engineering the circuit made it clear that 24V operation was fine, and it works well in the Pinz.
YMMV.
I had an old Sun Super Tach II of similar vintage to the Pinz, and reverse-engineering the circuit made it clear that 24V operation was fine, and it works well in the Pinz.
YMMV.
- Fri Dec 22, 2023 8:12 pm
- Forum: General chat
- Topic: FAT Fabrications Eastern Service Tour 2024
- Replies: 4
- Views: 1592
Re: FAT Fabrications Eastern Service Tour 2024
If your Pinz needs anything, I encourage you to get on Andre's route schedule. Been meaning to change those axle boots? He probably has spares with him, and it'll just be done when he does it. Recently bought your truck and have no idea when the fluids were last changed? Just ask him and it's done. ...
- Mon Dec 11, 2023 10:50 pm
- Forum: General chat
- Topic: Insurance Help
- Replies: 18
- Views: 8253
Re: Insurance Help
Reviving an old thread for modern day.... Farm Bureau -- No Safeco -- No Auto Owner's Insurance (https://en.wikipedia.org/wiki/Auto-Owners_Insurance) -- Yes Progressive -- rumored to be yes State Farm -- rumored to be yes Any other datapoints for where folks are finding insurance for a 710 (K or M)?...
- Wed Dec 06, 2023 11:08 pm
- Forum: Electrical
- Topic: Masked Light switch question...
- Replies: 5
- Views: 2661
Re: Masked Light switch question...
So....I once heard a rumor that the supergluing was intentional to prevent the operation of the blackout lights.
- Wed Dec 06, 2023 11:06 pm
- Forum: Electrical
- Topic: 710K Interior Light Relay wanted
- Replies: 5
- Views: 1829
Re: 710K Interior Light Relay wanted
Probably lots of options on amazon, or digikey.com
- Mon Dec 04, 2023 8:14 pm
- Forum: Drivetrain
- Topic: Central tube full of gear oil?
- Replies: 7
- Views: 2211
Re: Central tube full of gear oil?
Did you check to see that the connected gearboxes are full-up with their oil?
- Mon Dec 04, 2023 8:12 pm
- Forum: Electrical
- Topic: 710K Interior Light Relay wanted
- Replies: 5
- Views: 1829
Re: 710K Interior Light Relay wanted
Can you share some pictures of it?
Do you need the replacement to be exact to the original, with the goal of keeping the truck pristine, or can you accept a workable replacement?
Do you need the replacement to be exact to the original, with the goal of keeping the truck pristine, or can you accept a workable replacement?
- Tue Nov 07, 2023 10:00 pm
- Forum: Body & Interior
- Topic: Body lift?
- Replies: 5
- Views: 2682
Re: Body lift?
What about the windshield, how would you handle that area?
- Tue Nov 07, 2023 9:59 pm
- Forum: Engine
- Topic: Lean mixture
- Replies: 4
- Views: 1484
Re: Lean mixture
How you can easily check for vacuum leaks ? A common way to look for vacuum leaks is to spray brake cleaner on the carbs and around their bases. You'll hear a change in RPM if the engine draws in those fumes. The brake cleaner dries without residue, BTW. Check the vacuum hose that goes to the brake...