THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

Sorry the pics are out of order. I did first oil change on my Pinz after picking up a couple of oil filters from Scott at Expedition Imports and you can see what came out on plug. The reason for change was oil level was high. Drained out 8 quarts of oil. A few weeks ago I drained a quart and half an...

PayPal?

After the soft top completely dried, I coated it with 303 fabric guard. Probably 28 ounces of it.
I also coated some cushions on the deck with the fabric guard, forgot to put them away and the rain came down pretty hard. Pretty good water repellant I hope the UV protection is as good!

I used 303 fabric cleaner, it is actually a multi surface cleaner. While it did not get it perfectly clean it did a pretty good job. I also use a pressure washer to rinse the cleaner and dirt out of fabric with the pressure dialed down.

Yes,
It is Newfisher old truck. No unceccary drilling or welding the rack to the body which is something Newfisher and I have in common!

Just finished 1 phase of roof rack. Easy to modify if I don't like it. Only going to be for light loads. Very quick to remove probably won't have it on most of the time.

Had some time and scrap so made some roof rack support brackets.

Did temporary mount up of hiqh lift. Next cut a bit off the hoop to lower it, then I will take it apart for priming and paint.

Added a new piece to roof rack today. Will mount High lift jack to it tomorrow for testing.

Gadgetfreak,
Do you have a pic from the rear?
Thanks

Hoops have not been cut in picture yet. The front brackets are made from scrap pieces I had laying around which have not been cleaned up yet.

Laying out material for light weight roof rack that is very easy to remove when not in use. Machines a piece of stock to fit inside conduit prior to welding. Unistrut will be used on the top.

Has anyone on this site ever attended one of these events?

http://www.mvccnews.net/petaluma_spring.html

Took apart emergency flasher switch it looks like new inside. I still took my my meter and did checks of alll contacts with switch open and closed.