THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

If you are getting gas contamination of the oil I would be looking at the fuel pump being bad. I would have a hard time believing that choke problems would cause gas to accumulate in the crank case.

ziegler wrote:Trying to order side steps made by cruzoropeza. Does anyone know if he still fabricates them. Thank you Zig

cruzoropeza Last visited: Tue Feb 09, 2016 -- May try PMing him, he may get an email alert.

The 710M on the right appears to be much smaller than the 710K on the left. I know it is the camera lens that makes this difference, but do you see this? I thought the 710M was a Haflinger at first glance! No 710M in that photo. Your not talking about the 712M between the 710K and the Mog are you? ...

Next stop is the clutch and pressure plate. After reading up, there seem to be 2 useable clutch discs available. 4 springs or 6 smaller springs. The 4 spring 733i clutch is upgraded from the stock 6 spring or 533i clutch. Since I plan to upgrade the motor, I went with the HD clutch now. Hopefully t...

Would a ~720 watt alternator be sufficient for your power demands?

73
Ed

stiffler4444 wrote:$40K? Just checking......

Yes ~$40k USD or to you after shipping, taxes, import duties and exchange rate $$$$

$40k Wow. I guess its beauty is in the eye of the beholder.

http://viaircorp.com/ I have used a Viair 24v compressor with good results. I used mine without a tank to air up 2 33" tires at once using a "Y" hose with clamp on tire valve connectors. Would have been quicker with a tank however... tank no tank your choose. I don't remember the mod...

dead link

"Special interest vehicle. A vehicle of any age that, because of its significance, is being collected, preserved, restored, or maintained by a collector. The term includes a street rod vehicle and a street rod replica vehicle, as those terms are defined in section 286-26.5; a vehicle manufactur...

Is this the only DMV location you can go to? It sounds like you have encountered a public servant that has a personal mission and is possibly overreaching his authority.

What do you guys think about the inside of the bellhousing? I think they should be dusty, but dry in there. I'm sure my clutch slave is leaking a tiny amount. Could the oily residue be from the slave cylinder? Should I pull the flywheel and look at the main bearing seal since I've gone this far? Th...

M Wehrman wrote:Add a couple throttle linkage ends, cheap and difficult to find a replacement at times.

And spare bushings for the shifter dog bone.

I also am lacking in linguistic skills so... I find Google translate very useful along with online converters.

https://translate.google.com/#auto/en/A ... %C3%BCfen.

http://www.convert-me.com/en/convert/torque/

Lots of good information at the old" SDP-Pinzgauer" website.
The oridgional website is dead however it has been preserved on mad scientist.
http://madscientisthut.com/sdp-pin/html/site_map.html

Thanks for the suggestions. I haven't done anything myself to the vehicle since we got it two weeks ago. The Pinz had been sitting for 2 days before I checked the oil. In fact, it's been sitting for most of the time the previous Owner had it, he only put 100 miles on it in 4 years. I've only driven...