Search found 1778 matches
- Sun Apr 22, 2007 11:58 am
- Forum: Pinzgauer technical (old)
- Topic: Pressurized wheel housing in the front. Normal? Bad?
- Replies: 9
- Views: 3473
When draining the oil from a wheel asssembl, I was told to open the upper plug first. This was to prevent that pressure you mention from blowing oil out the drain plug, to avoid the mess. Apparently some pressure in there is normal, and as was suggested above, may be desirable. I use large pieces of...
- Tue Apr 17, 2007 2:18 pm
- Forum: General chat
- Topic: OOOPS
- Replies: 13
- Views: 5411
- Fri Apr 13, 2007 6:32 am
- Forum: Pinzgauer technical (old)
- Topic: front seat replacement
- Replies: 12
- Views: 5412
I found some Honda CRX seats from a junkyard. They work well because the seat itself is very slim. Then I used some scrap steel straps and basically made a flat frame up which has 2 clips at the front and a slotted pad at the rear which all can clip right into the truck like the stock arrangement. I...
- Wed Apr 04, 2007 10:11 pm
- Forum: Pinzgauer technical (old)
- Topic: Windshield Wiper Motors (700 series Pinz)
- Replies: 17
- Views: 7545
- Mon Jan 15, 2007 3:57 pm
- Forum: Pinzgauer technical (old)
- Topic: 712 Rear Spring Bushing Replacement
- Replies: 2
- Views: 1721
- Mon Jan 15, 2007 3:51 pm
- Forum: Pinzgauer technical (old)
- Topic: Mysterious Oil clouds.
- Replies: 7
- Views: 4029
Doug, I had this problem here in Wisconsin too. It was really friggin cold out. In my case, what I'm pretty sure happened is that the air filter got some moisture on it and froze. I had oil in the air box above both carbs, just dripping all over. It had sucked over a quart of oil out of the engine w...
- Sat Jan 13, 2007 9:54 pm
- Forum: Pinzgauer technical (old)
- Topic: 712 Rear Spring Bushing Replacement
- Replies: 2
- Views: 1721
712 Rear Spring Bushing Replacement
Hi All, The bushing on one of my rear springs seems worn. Over really rough terrain, it allows the ends of the spring to travel close enough to the body to scrape away paint. It also looks pretty old and crusty. Any advice from anyone who's done this job? It looks to me like it's just a matter of re...
- Sun Jan 07, 2007 8:59 am
- Forum: Pinzgauer technical (old)
- Topic: Front Springs
- Replies: 2
- Views: 1923