Search found 62 matches
- Thu Jun 01, 2017 12:11 pm
- Forum: Engine
- Topic: Popping/backfiring on deceleration - need a rebuild?
- Replies: 14
- Views: 7094
Re: Popping/backfiring on deceleration - need a rebuild?
Thoughts on the "oil being drawn into the carbs"? Glad its not what's causing the popping / detonation, but does it need attention?
- Wed May 31, 2017 11:02 pm
- Forum: Engine
- Topic: Popping/backfiring on deceleration - need a rebuild?
- Replies: 14
- Views: 7094
Re: Popping/backfiring on deceleration - need a rebuild?
Thanks Jim. That seems much more reasonable and likely to me. I did have the exhaust replaced not too long ago, but maybe it wasn't done right. I'll have it re-done. I appreciate the response.
- Wed May 31, 2017 8:28 pm
- Forum: Engine
- Topic: Popping/backfiring on deceleration - need a rebuild?
- Replies: 14
- Views: 7094
Popping/backfiring on deceleration - need a rebuild?
My '73 710M has been popping / backfiring pretty loudly on deceleration. I recently installed the SSI, which helped some stumble on acceleration, but didn't really change the deceleration issue. It seems to run fine under power, but I now tend to not downshift anymore, to avoid the loud popping. I h...
- Mon Sep 19, 2016 9:59 pm
- Forum: CLASSIFIEDS: Pinzgauers, Haflingers and Volvos For Sale. Parts and Goods too!
- Topic: 2-12 volt tachometers for sale- SOLD
- Replies: 4
- Views: 2508
- Mon Sep 19, 2016 4:27 pm
- Forum: CLASSIFIEDS: Pinzgauers, Haflingers and Volvos For Sale. Parts and Goods too!
- Topic: 2-12 volt tachometers for sale- SOLD
- Replies: 4
- Views: 2508
Re: 2-12 volt tachometers for sale
I'll take the 6000rpm. I tried sending a pm, it seems to be sitting in my outbox... What am I missing?
Re: Pinzi SSI
Add me to the list. I received my PinzSSI kit last week, and am going to try and install it today. Wish me luck...
- Sat Jan 02, 2016 10:08 pm
- Forum: Electrical
- Topic: SAV Swiss Style LED Taillights
- Replies: 38
- Views: 19507
Re: SAV Swiss Style LED Taillights
That square metal tab used to be crimped to the ground wire for the tail lights. The wire probably broke off at some point from corrosion, etc. and is now connected to the crimp ring terminal that is on the bolt. I suggest giving this area a good wire brushing or similar to improve the ground for y...
- Sat Jan 02, 2016 6:19 pm
- Forum: Electrical
- Topic: SAV Swiss Style LED Taillights
- Replies: 38
- Views: 19507
- Sat Jan 02, 2016 4:13 pm
- Forum: Electrical
- Topic: SAV Swiss Style LED Taillights
- Replies: 38
- Views: 19507
Re: SAV Swiss Style LED Taillights
I bought a set, and when I tried to remove the stock tail lights, I hit a stumbling block. There is a metal block soldered or welded to one of the bolts holding in the driver's side light. I can't get a wrench on the bolt head. Has anyone run into this? Should I just try to knock it off? http://i841...
- Sun Dec 13, 2015 2:25 am
- Forum: General chat
- Topic: exhaust question.....
- Replies: 4
- Views: 2243
Re: exhaust question.....
Dennis (@ LinDen) put a basic Turbo muffler on mine, and replaced the slip joints with mesh flex pipe. Runs better, a little quicker-revving, but noisier. Sounds like a teenager's Honda. It's fine with me, but the wife finds it annoying. Foam earplugs are cheap,
- Mon Nov 09, 2015 11:45 pm
- Forum: General chat
- Topic: trying to convince my wife that a Pinz is a good purchase.
- Replies: 33
- Views: 11538
Re: trying to convince my wife that a Pinz is a good purchas
As I was gearing up to get mine, my wife would roll her eyes and ask "why do you need that?". When I got it home, I took my wife to a big empty parking lot and convinced her to drive it. After about ten minutes of her driving over (and demolishing) multiple huge piles of snow, she was beam...
- Fri Oct 30, 2015 8:40 pm
- Forum: CLASSIFIEDS: Pinzgauers, Haflingers and Volvos For Sale. Parts and Goods too!
- Topic: 1973 Pinzgauer for sale
- Replies: 25
- Views: 13197
Re: 1973 Pinzgauer for sale
I had the privilege of checking out this rig when Morris was kind enough to help introduce me to Pinzgauers. He's being way too modest in the (lack of) description of this fine vehicle. It is so beautifully cared for and tricked out with some of the most clever improvements I've seen. This is gonna ...
- Tue Aug 18, 2015 11:46 pm
- Forum: Engine
- Topic: Engine tin powder coated
- Replies: 15
- Views: 7908
Re: Engine tin powder coated
That looks great!
- Fri Jul 31, 2015 2:55 am
- Forum: General chat
- Topic: Annual renewal
- Replies: 2
- Views: 1505
Re: Annual renewal
Good reminder. Donation sent. Thanks for the forum!
- Sat Apr 11, 2015 6:19 pm
- Forum: Engine
- Topic: Exhaust Flex Pipe
- Replies: 14
- Views: 8517
Re: Exhaust Flex Pipe
Just received my new flex pipe kit from SAV. Will attempt to install tomorrow as it is supposed to be a lovely day here in Denver, perfect for working on old vehicles. I'll use the pinz as a shade tree and hopefully stay cool under there. Probably not going to replace the gaskets at the manifold, j...