THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

drained the rest of the axle drives today,oil poured out of one other filler plug,checked oil levels in the diff units,oil poured out of level plug on 2 units,same 2 as axle drives,so I am assuming it was an over fill problem.is this a correct assumption? Regards Garymartin. Sounds like it as I was...

Some piccies

Your could take the clamp off the larger diameter on the yellow boot and see if oil comes out and also take the axle holding bolt out and see iff oil comes out there also. The best thing about the yellow boots is that they contain the oil as the half cuff type with bolts open up and leak. I would do...

My guesses

Oil in the yellow seal would be from the cup seal with sealent (if P93) and cup seal with o ring (if P90). There is also a wiper seal on the ball

On the end of the axle sleeve there is an o ring

Could it have been overfilled?

I got piccies of most the innards

This set of 7 came from Shropshire gunbus http://www.shropshiregunbus.co.uk/ These are military rims and typically come with runflats. I was thinking about a set of them to but the add on in weight is a bit silly. Would be great for serious off roading as can fully deflate the tyres. I would have to...

Have found several alternatives for the oil/water heat exchanger off later VW/Audi vehicles.

I will update when the bits arrive as I want to ensure it fits neatly

Hutchison Rims

A daft question as I Liked this thread.

The larger 12mm lugs cannot be fitted to the Haf hubs?

this one is smoking like a steam locomotive http://www.youtube.com/watch?v=ymKeVcHR ... r_embedded but it aint normal.

clean fuel filters and the tank out, and injectors, injection pump and should improve dramatically.

they are not the cleanest engine though

This guy has some great dent fixing videos http://www.youtube.com/watch?v=LdLDOkEPFgA

makes it look easy.

Just guessing it must be a fictional movie

As in a preview I saw today Natalie Portman was in the pretend TD (gasser) having a normal conversation whilst driving i.e. not screaming over the engine.

David Dunn wrote:

fesm_ndt wrote:.... just got back and am jetlagged to hell.

Ahhh, so you're in California.... that'll teach you to get jetlag!

Nah KL...... April was a bit Busy as was in Indonesia, Japan and just got back from UK. Hence measurements will be tomorrow as woke up at 2pm wanting dinner

Will do the tape measure tomorrow as just got back and am jetlagged to hell. For the purists, this is how the TD folding hinge parts look. http://memberfiles.freewebs.com/18/81/60978118/photos/TD-Windscreen-Frame/P4240634.JPG http://memberfiles.freewebs.com/18/81/60978118/photos/TD-Windscreen-Frame/...

Just looking through my photo collections

This is what a 716 and 718 VIN / VAG plate looks like

716

718

this one?
http://www.sdp-pinzgauer.org/html/diy_canvas_top.html

Will be looking at mine tomorrow