Search found 87 matches
Re: Plugs...
Thanks for the thoughts. I was just going on the basis of the military stuff being old technology and the civilian stuff at least the plugs being newer tech. I guess when in question refer to the most unread book in the world...the owners manual.
Plugs...
If you were running the civilian plugs (NGK)...how often would you change them? I normally change plugs on my carb vehicles every 10k-12k(miles that is). The plugs I just pulled out only have about 5k and look like they are worn out. The gap was fine. I just noticed a funny start-up and not as smoot...
- Mon Jun 18, 2012 9:32 pm
- Forum: Electrical
- Topic: 12 Volt Alternator...?
- Replies: 2
- Views: 1968
12 Volt Alternator...?
I know i've seen an extra alternator(12 volt) installed on the same belt system as stock somewhere on the web. I can't remember who's site it was. Any help would be great!
- Sat Jun 02, 2012 3:08 pm
- Forum: Engine
- Topic: Fuel Pump Lubrication
- Replies: 2
- Views: 2265
Re: Fuel Pump Lubrication
The little plate that you remove in order to knock the shaft (guts) out...pack it full of grease when you are going back together with it. My pump was not causing pressure issues but was very noisy and after the rebuild and grease trick...silence! Good luck and you can do this without removing the p...
- Fri May 18, 2012 9:52 am
- Forum: Brakes, Suspension, Steering & Tires
- Topic: Castor(Tire Wear)...
- Replies: 5
- Views: 3707
Re: Castor(Tire Wear)...
Thanks for the correction(castor/camber). That's what I thought. Within 3k miles I have noticed the tire wear and just wanted to make sure I wasn't mis'n something. Thanks!
- Thu May 17, 2012 9:55 pm
- Forum: Brakes, Suspension, Steering & Tires
- Topic: Castor(Tire Wear)...
- Replies: 5
- Views: 3707
Castor(Tire Wear)...
Do all Pinzy's(710) wear the outside of the tire alot more then the inside? Is there a way to set the castor. It is both front and rear...not just the front. Actually it seems to be more on the rear then the front. Stock rims and 285/75/16. Thanks in advance!
- Sun Apr 29, 2012 7:38 pm
- Forum: Engine
- Topic: Fuel Solenoids...
- Replies: 28
- Views: 12528
Re: Fuel Solenoids...
Did anyone ever find another place to buy the 24v solenoids besides the usual suspects?
- Sat Apr 07, 2012 9:41 pm
- Forum: Body & Interior
- Topic: Bench Seat Dimensions..?
- Replies: 5
- Views: 2422
Re: Bench Seat Dimensions..?
Thankya Kindly!!! Just gimmi an address where you want the beer ship'd!
- Sat Apr 07, 2012 4:24 pm
- Forum: Body & Interior
- Topic: Bench Seat Dimensions..?
- Replies: 5
- Views: 2422
Re: Bench Seat Dimensions..?
Basically the flat base board that the butt pad resides on. Thanks in advance!
- Fri Apr 06, 2012 10:20 pm
- Forum: Body & Interior
- Topic: Bench Seat Dimensions..?
- Replies: 5
- Views: 2422
Re: Bench Seat Dimensions..?
Come on now...somebody has got to know! I'll mail ya a beer if you can tell me. The only reason I ask is that i want to make sure it will fit before i go and design everything around it.
- Wed Apr 04, 2012 9:48 pm
- Forum: Body & Interior
- Topic: Bench Seat Dimensions..?
- Replies: 5
- Views: 2422
Bench Seat Dimensions..?
Does anyone have or know the dimensions of the folding bench seats that are in stalled in the M-models? It would be great to know before I fab up the rest of the camper interior! Thanks in advance.
Re: Idle Drop
What about the brake booster hose since it hooks right into the side of the front carb...? Just throw'n it out there!
- Sat Feb 25, 2012 11:36 am
- Forum: Engine
- Topic: Fuel Solenoids...
- Replies: 28
- Views: 12528
Re: Fuel Solenoids...
Sorry, I haven't had time to even look at my truck this week. I'm sure these solenoids are all 12 or 6 volt Porsche or VW pieces. Perhaps someone could send them a failed solenoid to match up physically, then we could throw a resistor in-line to have a suitable and affordable replacement. I know of...
- Fri Feb 24, 2012 10:06 pm
- Forum: Engine
- Topic: Fuel Solenoids...
- Replies: 28
- Views: 12528
Re: Fuel Solenoids...
Any luck...?Stekay wrote:Hey, look what I found! Not at my truck at the moment but could one of these be what we've been looking for?
http://www.ase-supply.com/category_s/77 ... =10&page=7
Can someone run out to their truck and read a part number off one?
- Wed Feb 22, 2012 10:31 pm
- Forum: Engine
- Topic: Fuel Solenoids...
- Replies: 28
- Views: 12528
Re: Fuel Solenoids...
I think I like where you're going with this...!pinzinator wrote:Could someone send me a defective solenoid? I will pay postage, contact PM.