Search found 230 matches
- Tue Mar 01, 2016 8:38 pm
- Forum: Drivetrain
- Topic: speedo cable/gearing
- Replies: 13
- Views: 6563
Re: speedo cable/gearing
I have the same problem. There is a crown gear that is driven off the front differential and apparently it can come off or break a tooth. Anyway, from the manual, the only way to get to that plate on the front of the diff is to take off the front bumper, the supporting structure, and all the steerin...
- Mon Feb 22, 2016 6:57 pm
- Forum: Engine
- Topic: torquing carb to manifold
- Replies: 3
- Views: 2843
Re: torquing carb to manifold
Not that I am aware of, and I have pulled and rebuilt my carbs before. The only thing I would recommend is some mid strength loctite. They seem to vibrate loose pretty easily if you don't use a little loctite and that will play all heck with your carb synchronization.
- Tue Jan 12, 2016 9:28 pm
- Forum: Engine
- Topic: Truck starts but won't idle
- Replies: 7
- Views: 4890
Re: Truck starts but won't idle
This morning the truck started and idled normally although it is backfiring occasionally into the carbs. The carb solenoids all tested normally. I'm assuming something got wet yesterday and it's time for a tune up.
- Mon Jan 11, 2016 10:39 pm
- Forum: Engine
- Topic: Truck starts but won't idle
- Replies: 7
- Views: 4890
Re: Truck starts but won't idle
Gentlemen, I had exactly the same problem tonight as I was leaving my hunting spot. I was had just closed the gate and the truck just died. For a while it would not fire at all. I finally pulled choke and she would run rough as long as I kept the RPMs up. So tomorrow I'll check the solenoids and I e...
- Sun Oct 25, 2015 1:24 pm
- Forum: Engine
- Topic: Gear reduction starter servicing
- Replies: 10
- Views: 4772
Re: Gear reduction starter servicing
Jim, You are correct. The dash lights were going out when cranking. And the problem was one of the batteries was dead. Given the batteries lasted nine years I won't complain and the reputation of EI's starter remains unspoiled! I took the second battery out and it will serve as a trolling motor batt...
- Sun Oct 25, 2015 9:25 am
- Forum: Engine
- Topic: Gear reduction starter servicing
- Replies: 10
- Views: 4772
Re: Gear reduction starter servicing
Krick3tt,
Thanks. I have one, just not where I have the truck for hunting season...
Thanks. I have one, just not where I have the truck for hunting season...
- Sat Oct 24, 2015 7:29 pm
- Forum: Engine
- Topic: Gear reduction starter servicing
- Replies: 10
- Views: 4772
Re: Gear reduction starter servicing
By the way, I had checked the terminals at the starter while I was in the woods. They seemed fine.
I just opened the battery box and looked, the batteries are marked 01/06!
I just opened the battery box and looked, the batteries are marked 01/06!
- Sat Oct 24, 2015 7:25 pm
- Forum: Engine
- Topic: Gear reduction starter servicing
- Replies: 10
- Views: 4772
Re: Gear reduction starter servicing
Thanks Paul and Jim. I will probably call EI Monday On the batteries, there is the possibility they are the problem. These are Yellow Top Optimas I put in to support the 24 v winch I put on several years ago. I don't have my maintenance log here with me but they are probably pushing five years. I ma...
- Sat Oct 24, 2015 3:28 pm
- Forum: Engine
- Topic: Gear reduction starter servicing
- Replies: 10
- Views: 4772
Gear reduction starter servicing
Hi Folks, I have had the Gear Reduction Starter from EI for a few years. I love it and to this point it has been great. Yesterday I was at my deer stand when the starter went out. The solenoid clicks and buzzes but no spin from the motor. So, my question is anyone have some tips on servicing this th...
- Sat Sep 19, 2015 4:38 pm
- Forum: Body & Interior
- Topic: Pinz mirrors, US military issue!
- Replies: 8
- Views: 4966
Re: Pinz mirrors, US military issue!
Touché'! They look like pinz mirrors to me! Actually, I would be glad to add an LAV-25 to my collection....
- Wed Sep 16, 2015 8:53 pm
- Forum: CLASSIFIEDS: Pinzgauers, Haflingers and Volvos For Sale. Parts and Goods too!
- Topic: Wanted good stock distributor cap
- Replies: 3
- Views: 1906
Re: Wanted good stock distributor cap
I have one too.
- Tue Sep 15, 2015 12:53 pm
- Forum: Body & Interior
- Topic: Water in the key hole under the dog house lock plates.
- Replies: 4
- Views: 2723
Re: Water in the key hole under the dog house lock plates.
Perfect. Thanks guys.
- Sun Sep 13, 2015 10:18 pm
- Forum: Body & Interior
- Topic: Water in the key hole under the dog house lock plates.
- Replies: 4
- Views: 2723
Water in the key hole under the dog house lock plates.
Hey guys, I took a buddy and son mudding for the son's thirteenth birthday. It was great and were in some of the deepest water I have run in for years. We had water coming under the dog house and I spent a good part of today pulling weeds from all over the engine. Anyway, I noticed a problem I had n...
- Thu Sep 10, 2015 10:57 pm
- Forum: Engine
- Topic: Engine bogging
- Replies: 13
- Views: 7805
Re: Engine bogging
I meant "spark" at low speed.... My typing on an iPad is not so good.
- Thu Sep 10, 2015 10:54 pm
- Forum: Engine
- Topic: Engine bogging
- Replies: 13
- Views: 7805
Re: Engine bogging
Fuel pump or fuel filter. A good friend of mine, who had been a mechanic at one point in his life, says to start with the simple explanation first. After spending a lot of time on my own theories, I have learned my lesson. In your case, my thinking is this, it was ok at idle but not at speed. What i...