THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

Which model Astrodyne did you get and where did you source it?

Thanks,

Paul

McMaster-Carr sells leather in 1" wide strips in various thicknesses. The chrome tanned is a grayish green color.

http://www.mcmaster.com/#leather-fabric/=76xbhr

Paul

Kevin, The specs on those NAPA shocks are about as close to stock as any shocks I've seen. From my measurements the stock shocks are as follows: Collapsed 13 1/4 Extended 20 7/8 Travel 7 5/8 I don't think the additional 1/8" travel on the NAPA's will give you any problems but someone else here ...

What Pinzgauer Pete said.
I always start by cleaning the oil and grease off so I can be sure where the leak is coming from. Oil really likes to migrate around and can really throw you off.
Good luck,
Paul C

Nice looking lights and clean installation! Do you have pix of the backside from under the body?

Source and price please?

Paul C

(edit) (Sorry for the repeated question- posted without refreshing first)

After seeing how nice the Sprinter seats looked in "texas pinzgauer" 's Pinz ( http://real4x4forums.com/PinzgauerBBS/viewtopic.php?t=5121 ) I finally got motivated to install the set I bought last Fall. I tried a little different approach to mounting them to the original frames and am happ...

I've never seen a replacement for the arm except from SAV: http://www.pinzgauer.com/showdetails.php?cat=pinzgauer&partno=SAV7202 The mirror heads are available in a variety of designs from Pep Boys, etc. Also Mercedes G-Wagen mirrors work very well as do Unimog mirrors. Here's a write-up that Sc...

I too have had great luck with the Coopers. I just bought a set of the ST's for $168 per tire.

Paul C

Sorry I didn't notice this post sooner. I had this same problem with one of my Pinz's. The wiper motor linkage lever would allow the wiper push rods to drop too low (below horizontal) and cause the entire wiper arm to try to rotate in a complete circle. My solution was to replace the 2 wiper push ro...

There are some caps listed on ebay today:
http://cgi.ebay.com/ebaymotors/Olive-Bl ... 500wt_1116

He's also got Camo Distressed and Stone Distressed.

Paul C

Thilo at T-Lo's Ultimate Offroad http://www.mogsrus.com/ may have some kits. He has rebuilt fuel pumps for me and does an excellent job.

Paul

Here's the part number on the kit #7121085600. Both EI and SAV carry them though SAV's site shows they are currently out.

Paul

I can still see yours, mine and others photos. Maybe your browser isn't showing them for some reason? Are you showing a question mark where the pic should be? I've had this happen occasionally.

Paul

Looks like one of our farm equipment repairs

I'll bet it holds up for quite a while. Nice repair!

Paul C

I haven't done one but I think Paul Underwood has - maybe he'll chime in here.

I'm thinking that since it's described as a split seal that maybe only the retaining ring has to be loosened and slid out of the way to replace the seal :?:

Paul C