Injectors for Beck style EFI -- up for graps

Engine troubles? Try here.
Post Reply
User avatar
rmel
United States of America
Posts: 1395
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Injectors for Beck style EFI -- up for graps

Post by rmel »

I have a set of new unused Accel 30 lb Injectors, ACC-150130, currently on Summit racing for $48 ea.

These fit the Beck style EFI setup. I bought these to replace very old Rochester injectors. Problem I
discovered is the Accel's won't fit my injector bung -- this is because I have Beck Prototype #1 which was
designed for Rochester injectors exclusively.

Since proto #1, Jim L apparently influenced Beck to standardize for the more common Bosch EV1 style
injectors, Accel conforms to the Bosch EV1 fit.

If you are interested in a set of Accel's either as a refresh or a set of spares PM me, we can deal.
Since then I found a refurbished set of Rochesters, see below.

P.S. the "quilting" around the intake manifold is insulation.
EFI.JPG
EFI.JPG (652.33 KiB) Viewed 1816 times
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
Post Reply