Oil dripping from pan
Oil dripping from pan
The oil pan gasket is good but there's oil coming from above the oil pan on the drivers side. It's not from the oil cooler, does anyone has any ideas. I changed the O rings and the gasket of the oil cooler thinking that would solve the problem but it didn't. Can it be the exhaust manifold gasket? Thank you. Zig
Re: Oil dripping from pan
On the drivers side is the cylinder side so there are several possibilities.
But a pix of the area would help.
But a pix of the area would help.
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Re: Oil dripping from pan
Pushrod tube seals drying up. Or the oil return tube. Both use rubber beveled washers to seal against oil leaks. Make sure the valve covers aren’t weeping either.
Fat Fabrications
2993 FM 1647
Winnsboro, TX. 75494
fatfabrications@yahoo.com
(903) 365-2332 shop
(951) 765-7224 mobile
Facebook.com/dokapinz6x6
Www.fatfabrications.com
2993 FM 1647
Winnsboro, TX. 75494
fatfabrications@yahoo.com
(903) 365-2332 shop
(951) 765-7224 mobile
Facebook.com/dokapinz6x6
Www.fatfabrications.com