Bore Pitch Question
Bore Pitch Question
I can't find it anywhere. Does anyone know the distance between cylinders (pitch)in mm?
Re: Bore Pitch Question
Boy that's a tough one. If you have your crankshaft out you could measure it there.
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Re: Bore Pitch Question
Sees like you could measure the on center distance between the exhaust bolts for each set of cylinders and then average the three values to get a pretty good approximate value.
Any issue with this idea?
Any issue with this idea?
Re: Bore Pitch Question
Turns out to be 132mm