I am rebuilding my 1973 710M engine and need a shop that can machine the heads for new valves and seats.
My local shop did not have the proper size tools to do the job correctly.
Doe anyone know of a shop that has the proper tooling?
Thanks,
Anthony
Engine Shop Needed
Engine Shop Needed
----------------
If you are not living life on the edge, you are taking up too much space!
1973 710M with aftermarket hardtop.
If you are not living life on the edge, you are taking up too much space!
1973 710M with aftermarket hardtop.
- audiocontr
- Posts: 1868
- Joined: Fri May 01, 2009 1:30 pm
- Location: Buffalo NY
Re: Engine Shop Needed
try to find Jason Everett in Java. I'm not sure if this is the name of his shop still, but searching for machine work in Java shouldnt turn up many results. I went to school with Jason, and follow his work on Facebook. He might have what you need
Everett Precision Mfg
Phone: (585) 457-3113
Name: Jason Everett
I'll be in East Aurora this weekend/fourth of July with my haflinger
Everett Precision Mfg
Phone: (585) 457-3113
Name: Jason Everett
I'll be in East Aurora this weekend/fourth of July with my haflinger
1973 712m
1968 Haflinger
1965 Pathfinder
1978 GMC Palm Beach (Hey, its got 6 wheels!!)
1968 Haflinger
1965 Pathfinder
1978 GMC Palm Beach (Hey, its got 6 wheels!!)
Re: Engine Shop Needed
If nothing pans out, I have had two sets of heads rebuilt here.
http://ljsspeed.wixsite.com/ljsspeedandmachine
John, has a lot of experience with air cooled engines and performance.
Big plus EI's is in the general area for parts, negative is the hassle of
shipping.
Just FYI John doesn't fly cut the heads so you would need to hand
lap them to the cylinders.
http://ljsspeed.wixsite.com/ljsspeedandmachine
John, has a lot of experience with air cooled engines and performance.
Big plus EI's is in the general area for parts, negative is the hassle of
shipping.
Just FYI John doesn't fly cut the heads so you would need to hand
lap them to the cylinders.
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q