Wheel drive leak solved? (bad fill plug)

Diffs, axles, lockers, transmissions, portals, that kind of thing.
Post Reply
ChickenPinz
United States of America
Posts: 234
Joined: Tue Feb 11, 2020 7:16 pm

Wheel drive leak solved? (bad fill plug)

Post by ChickenPinz »

I've been chasing a slow leak from the LF wheel drive coming from the fill plug. I'd tried replacing the copper washers, annealing the washers, cleaning everything, giving it a bit extra torque, but the slow leak persisted from the plug area. The casting surface looks pristine.

Then I put the plug under a microscope, and it appears it may have been mis-machined. Talking to a machinist friend of mine, he suggests it was from someone pulling off the cutter too early, and that would leave this spiral cut.

A new plug has been installed (with red paint), and I'm awaiting test results.

Anyone else seen leaks from a fill plug before?
PXL_20211208_055246716.MP.jpg
PXL_20211208_055246716.MP.jpg (857.67 KiB) Viewed 606 times
PXL_20211208_055331250.MP.jpg
PXL_20211208_055331250.MP.jpg (939.41 KiB) Viewed 606 times
PXL_20211208_055156324.jpg
PXL_20211208_055156324.jpg (697.64 KiB) Viewed 606 times
710K
Post Reply