Loctite

Diffs, axles, lockers, transmissions, portals, that kind of thing.
Post Reply
SAM. C.
Posts: 141
Joined: Mon Nov 06, 2006 1:08 am
Location: Brisbane, Australia

Loctite

Post by SAM. C. » Wed Dec 27, 2017 6:07 am

Hi All

When reassembling the Half Axles where do I put the Loctite ?

Thanks

Sam

User avatar
rmel
United States of America
Posts: 918
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: Loctite

Post by rmel » Wed Dec 27, 2017 11:36 am

Repair manual calls for #270 green. This is high strength. However, I have been advised to use
Loctite -- Bearing retainer e.g. #609, from someone who has done MANY of these repairs.
A link for you here: http://www.loctite.com.au/3320_AUE_HTML ... 2648195073

Where it is applied is on the mating surfaces. There's a fair amount of surface area there so it will require
more than a "tiny" squeeze tube.
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712M

Driver: Ron // KO0Q

Post Reply