Big bang, now metal "rattling" sound...yikes!
-
- Posts: 776
- Joined: Mon Mar 15, 2010 1:46 pm
- Location: Crystal Beach ON CAN
Re: Big bang, now metal "rattling" sound...yikes!
Berger, once that case is open, good luck keeping it all together! I was surprised at how everything comes apart with no need for coaxing. Make sure you have a floor jack under the diff and jack it up a bit to free up the aluminum ring. Keep in mind, the whole assembly wants to roll around if you still have the drums resting on the floor. I had placed jack stands under the axle housings to keep this from happening.
tx Dave
tx Dave
1972 710m
-
- Posts: 776
- Joined: Mon Mar 15, 2010 1:46 pm
- Location: Crystal Beach ON CAN
Re: Big bang, now metal "rattling" sound...yikes!
New split boot from Scott at E.I. installed. Man, that was easy. I'm sure it's partly because the front end is out, but the quality boots sure do go on without a hitch.
- Attachments
-
- pinz split boot2.jpg (132.36 KiB) Viewed 5066 times
-
- pinz split boot1.jpg (123.58 KiB) Viewed 5066 times
1972 710m
-
- Posts: 1776
- Joined: Fri Apr 16, 2004 8:08 am
- Location: Blue Mounds, WI
Re: Big bang, now metal "rattling" sound...yikes!
HEY! You've got that boot oriented wrong. Check the instructions that came with the boot.
The seam belongs to the right, as you stand looking at the differential, on both sides. If you look closely at the diff., you'll notice that the axles do not line up. One is ahead/behind the other. The seam should be at the point of least flex: ie. right as you face it.
The seam belongs to the right, as you stand looking at the differential, on both sides. If you look closely at the diff., you'll notice that the axles do not line up. One is ahead/behind the other. The seam should be at the point of least flex: ie. right as you face it.
-
- Posts: 776
- Joined: Mon Mar 15, 2010 1:46 pm
- Location: Crystal Beach ON CAN
Re: Big bang, now metal "rattling" sound...yikes!
Thanks for the heads up. Somehow my boot arrived without instructions, so it was a bit of guesswork. So the boot needs to rotate right as was the orientation of the old one (90 degrees)...makes sense..... will adjust tonight!undysworld wrote:HEY! You've got that boot oriented wrong. Check the instructions that came with the boot.
The seam belongs to the right, as you stand looking at the differential, on both sides. If you look closely at the diff., you'll notice that the axles do not line up. One is ahead/behind the other. The seam should be at the point of least flex: ie. right as you face it.
tx Dave
1972 710m
Re: Big bang, now metal "rattling" sound...yikes!
Good catch Paul!
pcollete wrote: Instructions from SAV (with some minor editing from me):
- Remove old boot and clean area.
- Do not grease boot or axle parts.
- Put the split boot on the axle.
- Coat the split area with Loctite #414 and press together. Hold until dry (approx 30-60 seconds depending on how much you put on).
- Slide the split boot towards the differential housing as far as it goes.
- Rotate the boot until the split points to the front on the right side (passenger) and to the rear on the left side (driver).
- Install the new clamps. The tightening bolts should be on the opposite side from the split.
Ottawa, Canada
1974 710M
2007 2WD Ural Patrol
1974 710M
2007 2WD Ural Patrol
-
- Posts: 776
- Joined: Mon Mar 15, 2010 1:46 pm
- Location: Crystal Beach ON CAN
Re: Big bang, now metal "rattling" sound...yikes!
Thanks for the install details. Much appreciated!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
1972 710m
-
- Posts: 776
- Joined: Mon Mar 15, 2010 1:46 pm
- Location: Crystal Beach ON CAN
Re: Big bang, now metal "rattling" sound...yikes!
Ok, so the boot has been reoriented, case has been reassembled, witches hat installed and and steering/speedo drive reattached to front end.
Of course, after filling with gear oil, I have developed a small "weeping" leak at the passenger O-ring, probably from dislodging it and resetting it. No point in fixing it until the diff is back in the truck, as I will have to remove the axle drive.
Hopefully the full reinstallation will be taking place on Friday, after I do some prep work (shocks, etc).
tx Dave
Of course, after filling with gear oil, I have developed a small "weeping" leak at the passenger O-ring, probably from dislodging it and resetting it. No point in fixing it until the diff is back in the truck, as I will have to remove the axle drive.
Hopefully the full reinstallation will be taking place on Friday, after I do some prep work (shocks, etc).
tx Dave
- Attachments
-
- pinz witches hat installed.jpg (105.56 KiB) Viewed 5037 times
-
- pinz steering installed.jpg (92.04 KiB) Viewed 5037 times
1972 710m
-
- Posts: 776
- Joined: Mon Mar 15, 2010 1:46 pm
- Location: Crystal Beach ON CAN
Re: Big bang, now metal "rattling" sound...yikes!
O ring leak is now fixed. Just took it apart again and cleans all surfaces really well. Reassembled and we are in business!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
1972 710m
-
- Posts: 1704
- Joined: Wed Apr 14, 2004 3:42 pm
- Location: San Bernardino Ca
- Contact:
Re: Big bang, now metal "rattling" sound...yikes!
Boot orientation is best at 10:00 or 2:00 o clock position.
-
- Posts: 776
- Joined: Mon Mar 15, 2010 1:46 pm
- Location: Crystal Beach ON CAN
Re: Big bang, now metal "rattling" sound...yikes!
Thanks Jim. I'll fix that. .........again. Lol
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
1972 710m
-
- Posts: 776
- Joined: Mon Mar 15, 2010 1:46 pm
- Location: Crystal Beach ON CAN
Re: Big bang, now metal "rattling" sound...yikes!
All done. Woohoo. Been washing it all day after my celebratory muck run yesterday. Vacation is shaping up
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
1972 710m
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada
Re: Big bang, now metal "rattling" sound...yikes!
Congrats!
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
Re: Big bang, now metal
stiffler4444 wrote:All done. Woohoo. Been washing it all day after my celebratory muck run yesterday. Vacation is shaping up
Sent from my iPhone using Tapatalk
Registration for Trail-Fest is still open!
http://www.trailfest.ca/
Ottawa, Canada
1974 710M
2007 2WD Ural Patrol
1974 710M
2007 2WD Ural Patrol