Transmission Removal
Re: Transmission Removal
Except for the gears, these are the remaining culprits that need to be replaced, a needle bearing, a syncro hub and syncro and a couple of washers.
1972 710K
Re: Transmission Removal
Back on the road!
Drove it from the old house in Bremerton to the new one in Everett; for those familiar with Western Washington. It's been 6 months, and it was used to haul a whole bunch of stuff to the new house so It's cleaning time and then probably a cruise or two.
Drove it from the old house in Bremerton to the new one in Everett; for those familiar with Western Washington. It's been 6 months, and it was used to haul a whole bunch of stuff to the new house so It's cleaning time and then probably a cruise or two.
1972 710K
-
- Posts: 545
- Joined: Mon Jan 03, 2005 1:33 pm
- Location: San Juan Mountains, CO
Re: Transmission Removal
Just curious Noah,
Did your tranny fail because of impact abuse/wear or from the fluid getting too low?
Did your tranny fail because of impact abuse/wear or from the fluid getting too low?
Re: Transmission Removal
There is a distinct possibility that the complete and utter lack of fluid contributed in some way to the premature failure of rotating parts inside my transmission.
But if that's the case I'd never admit it.
But if that's the case I'd never admit it.
1972 710K