Rear Emergency Flashers
Rear Emergency Flashers
"Everything" works (taillights, turn signals, flashers on the front) but there are no flashers on the back. Any clues on how to track this down? Thanks!
Stuck in the bureaucratic spin cycle!
-
- Posts: 1704
- Joined: Wed Apr 14, 2004 3:42 pm
- Location: San Bernardino Ca
- Contact:
Re: Rear Emergency Flashers
If the 4 ways only flash the fronts, the 4 way switch assembly will need replacement. The contact board warps or melts preventing signal to rear lamps.
Re: Rear Emergency Flashers
If you haven't already ordered a new switch, remove it and look at the face of the hazard switch for corrosion of any kind and clean it then try reinstalling. Worked for me when I had the same problem.
Before After If not order one. Good luck.
Before After If not order one. Good luck.
Josh
Barrie, Ontario, Canada
'82 - 712AMB/M
Barrie, Ontario, Canada
'82 - 712AMB/M
Re: Rear Emergency Flashers
Thanks. We got it apart and cleaned it up but no luck. Will order a new one ASAP and go from there. Appreciate the assistance!
Stuck in the bureaucratic spin cycle!
Re: Rear Emergency Flashers
i just realize that my hazzard lights works fine for about 10 second then left side starts to die... after a while quit working... is this related to this flasher too ?????
1985 710MS
1985 712MK
1988 PAJERO CAMEL SPECIAL 042/150
1985 712MK
1988 PAJERO CAMEL SPECIAL 042/150
Re: Rear Emergency Flashers
open up the lens covers and clean the power and ground contacts.
Fat Fabrications
2993 FM 1647
Winnsboro, TX. 75494
fatfabrications@yahoo.com
(903) 365-2332 shop
(951) 765-7224 mobile
Facebook.com/dokapinz6x6
Www.fatfabrications.com
2993 FM 1647
Winnsboro, TX. 75494
fatfabrications@yahoo.com
(903) 365-2332 shop
(951) 765-7224 mobile
Facebook.com/dokapinz6x6
Www.fatfabrications.com
- Jimm391730
- Posts: 1456
- Joined: Wed Apr 14, 2004 10:58 pm
- Location: Idyllwild, CA
Re: Rear Emergency Flashers
The four way switch can be "iffy" (mine was) and sometimes one or the other of the rear lights would work, then not work, randomly. I dissasembled the switch, cleaned it, and shimmed it for more contact pressure and it has be working since then... but it will need to be replaced, eventually.hazzard lights works fine for about 10 second then left side starts to die... after a while quit working... is this related to this flasher too ?????
Jim M.
712W and 710M
712W and 710M