Flasher Relay

All things relating to the flow of electrons in a Pinz.
Post Reply
User avatar
ScottishPinz
Posts: 407
Joined: Wed Feb 22, 2006 3:04 am
Location: Edinburgh, Scotland
Contact:

Flasher Relay

Post by ScottishPinz » Sun Oct 07, 2012 2:02 am

OK so I have a new Flasher Relay to sort out my slow indicators, but question is, where is the relay located so I can change it over.
Attachments
IMG_4402.jpg
IMG_4402.jpg (36.63 KiB) Viewed 1225 times

User avatar
krick3tt
Posts: 2448
Joined: Thu Mar 16, 2006 6:48 pm
Location: Denver, CO USA

Re: Flasher Relay

Post by krick3tt » Sun Oct 07, 2012 6:33 am

My flasher relay is located above the foot brake reservoir on the front left at the flat panel.
Any man who thinks he can be happy and prosperous by letting the government take care of him:
better take a closer look at the American Indian.---Henry Ford

User avatar
CentAr712
United States of America
Posts: 259
Joined: Tue Aug 16, 2011 10:33 am
Location: Little Rock, Arkansas
Contact:

Re: Flasher Relay

Post by CentAr712 » Sun Oct 07, 2012 1:41 pm

I just changed mine last week; the ones at SAV are as cheap as I could find and they work great. In the pic on their site it looks like a cheap generic part, but when you get it, it actually looks like a good quality name brand component. I cut the metal bracket off the old stock flasher unit and modified it to hold the new one. The flasher is the aluminum cylinder near the emergency flasher switch.
Chris.
https://www.supanik.com/pinz
'76 712M Rapier Cargo (Swiss), For Sale
'83 MB W460 280GE G-Wagen, For Sale

User avatar
ScottishPinz
Posts: 407
Joined: Wed Feb 22, 2006 3:04 am
Location: Edinburgh, Scotland
Contact:

Re: Flasher Relay

Post by ScottishPinz » Tue Oct 09, 2012 7:43 am

Fitted new flasher relay. Bit different as it doesn't have an earth connection to the body. All works fine except the light on the dash doesn't flash very brightly now!

dbixby001
United States of America
Posts: 3
Joined: Sun Aug 27, 2017 12:37 pm

Re: Flasher Relay

Post by dbixby001 » Sun Feb 25, 2018 4:13 pm

Is this the correct replacement for my original 91PMK 3+1x20W 24V flasher relay? https://www.pinzgauer.com/showdetails.p ... no=SAV1430

If so, what is the proper way to install the new flasher unit? The old one I have had two separate bolts connected to separate wires. This just looks like it has the one hole for one bolt. Please advise.

User avatar
TechMOGogy
Canada
Posts: 2676
Joined: Wed Feb 01, 2012 11:39 am
Location: Ontario, Canada

Re: Flasher Relay

Post by TechMOGogy » Sun Feb 25, 2018 4:28 pm

http://www.real4x4forums.com/PinzgauerB ... =14&t=6089

If you don’t want to drill a new hole higher up you can use the existing right hole from old flasher but it will be a bit lower
2B823300-512C-4F05-84DA-349E03CD0881.jpeg
2B823300-512C-4F05-84DA-349E03CD0881.jpeg (1.87 MiB) Viewed 376 times
72 Pathfinder | 75 710M 2.7i | 94 350GDT | 96 350GDT Worker

User avatar
bbolander
United States of America
Posts: 245
Joined: Sun Oct 23, 2016 11:02 am
Location: Mesquite, NV

Re: Flasher Relay

Post by bbolander » Sun Feb 25, 2018 5:48 pm

I managed to fit mine to the top hole, wasn't easy.
IMG_1656 copy.jpg
IMG_1656 copy.jpg (526.54 KiB) Viewed 369 times
1971 Pinzgauer 710M, all stock including 245-16 Maloya tires, taken off and stored for show
BFG MT KM2 265/75R16's on Black SAV replacement rims on now

Post Reply