Startermotor wiring pictures needed!

Dedicated to the memory and knowledge shared by Jim Mettler - All things relating to the flow of electrons in a Pinz.
Post Reply
Pollieman86
Posts: 2
Joined: Sun Sep 03, 2017 3:25 pm

Startermotor wiring pictures needed!

Post by Pollieman86 » Mon Sep 04, 2017 9:53 am

Hi guys
I'm new to the forum. My name is Thomas. 30 years old and love tinkering on cars.
I have a project 1972 712m. It needs a heap of work. It came without a starter motor so I bought a new old stock bosch original. Now I can't for love of everything holy figure out the wiring. Because the bosch motor only seems to have 1 connection, the other bolt is painted over.
And since the batterie tray is rusted out it also came without batteries. And puch in all their wisdom use only black wires. I'm quite good at reading diagrams so I pretty much figured out wich wire is plus and which is negative. Eventhough my plus wire says minus on the clamp.
Since I don't want to fry my new starter or other electrics, could someone take some pictures of the starter so I can see where all wires are supposed to go. The diagram shows the 30 and 50 connection, I need a picture which is what.
I have spent hours on the net looking for pictures in several different languages, but no-one ever seems to take pictures of that side of the engine.

I hope you guys can help me. Thanks in advance

User avatar
Hotzenplotz
Austria
Posts: 278
Joined: Wed Jan 18, 2012 9:07 am
Location: Vienna, Austria

Re: Startermotor wiring pictures needed!

Post by Hotzenplotz » Mon Sep 04, 2017 10:53 am

let me introduce you to the two versions of starters used in Pinzgauers
Image

the left one is version 1, right one is v2

both have a M8 bolt on the solenoid connected to battery plus 24 volt and negative ground.
the solenoids have one additional connector, where you trigger the starter.

I have tried it, if you misconnect the batteries, the starter still works, you just fry the generator ...
Cheers
Albert
========================
My Pinz has NEVER been with any army

User avatar
rmel
United States of America
Posts: 822
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: Startermotor wiring pictures needed!

Post by rmel » Mon Sep 04, 2017 10:55 am

Schematics for the Pinz'ies

viewtopic.php?f=22&t=10424
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712M

Driver: Ron // KO0Q

User avatar
pcolette
United States of America
Posts: 1375
Joined: Sun Dec 10, 2006 7:38 pm
Location: Southwest Wisconsin

Re: Startermotor wiring pictures needed!

Post by pcolette » Mon Sep 04, 2017 12:32 pm

IMG_4006.jpg
IMG_4006.jpg (581.14 KiB) Viewed 532 times
Paul C.
_________
'73 Swiss 710M
'89 Puch 230GE
2002 MB G500 (For Sale)

Pollieman86
Posts: 2
Joined: Sun Sep 03, 2017 3:25 pm

Re: Startermotor wiring pictures needed!

Post by Pollieman86 » Mon Sep 04, 2017 1:47 pm

Thanks Guys that's exactly what I needed.
I wonder how I could have missed the little screw to the side.
Now I just have to find the missing black starter button wire.

Post Reply