THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

From Vince Sweeney: You have arrived at the original "Real 4x4's" Forums, founded in 1999.
http://real4x4forums.com/PinzgauerBBS/

Starter mount

http://real4x4forums.com/PinzgauerBBS/viewtopic.php?f=14&t=11756

Page 1 of 1

Starter mount

Posted: Mon Feb 25, 2019 8:43 am
by mmcc100
I have my new gear reduction starter and ordered a new mount. When I replaced the starter and went to crank it, the rubber mount came loose at the bottom due to decay. I'm having trouble getting the mount off. I know from the diagrams that there are nuts behind the screws which would mean I need to get in there somehow. Any pics or tips before I start digging in? I got the left side bottom bolt out since it was easy to access front and back.

Re: Starter mount

Posted: Mon Feb 25, 2019 9:47 am
by pcolette
All fasteners are removable without having to disassemble anything else on the engine (ie. the bellhousing). There is an access panel in the right front wheel well that is held on with 4 bolts from within the wheel well. Removing it gives you more room and also easier to see things.
IMG_1620.jpg
IMG_1620.jpg (334.17 KiB) Viewed 2754 times
IMG_3100.jpg
IMG_3100.jpg (323.63 KiB) Viewed 2754 times
IMG_3102.jpg
IMG_3102.jpg (350.5 KiB) Viewed 2754 times
IMG_3103.jpg
IMG_3103.jpg (289.38 KiB) Viewed 2754 times
IMG_3106.jpg
IMG_3106.jpg (368.98 KiB) Viewed 2754 times

Re: Starter mount

Posted: Mon Feb 25, 2019 9:49 am
by pcolette
You may also want to consider this mount:
viewtopic.php?f=5&t=11463
All times are UTC-05:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited