Power Port Connection
-
- Posts: 27
- Joined: Sat Feb 24, 2024 2:18 pm
- Location: Longmont, Colorado
Power Port Connection
Anyone hooked up a light/rotating beacon via the power port? Any info on the appropriate connector that goes in there?.....Light etc.?
Re: Power Port Connection
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
-
- Posts: 27
- Joined: Sat Feb 24, 2024 2:18 pm
- Location: Longmont, Colorado
Re: Power Port Connection
Sheesh, thanks man. There is so much expertise here on this forum. I've only had my rig for a few months. Thank you for always being patient with us new folks.....
-
- Posts: 337
- Joined: Tue Feb 11, 2020 7:16 pm
Re: Power Port Connection
No need to go to EI for it. It's a common connector. BMW Triumph Tiger Ducati Motorcycles, for example. It's a Euro thang.CaptainRon wrote: ↑Tue Apr 30, 2024 8:05 pm Anyone hooked up a light/rotating beacon via the power port? Any info on the appropriate connector that goes in there?.....Light etc.?
Here's a product that uses it, for example: https://a.co/d/bRXmlFA
710K
-
- Posts: 337
- Joined: Tue Feb 11, 2020 7:16 pm
Re: Power Port Connection
Upper left in the attached photo, just to the left of the red flasher knob. The white knob above the socket turns on the power to that socket.
710K