converter install

Dedicated to the memory and knowledge shared by Jim Mettler - All things relating to the flow of electrons in a Pinz.
Post Reply
United States of America
Posts: 77
Joined: Sat Dec 05, 2009 7:34 pm
Location: mcalester okla

converter install

Post by Pols497 » Tue Feb 23, 2010 10:06 am

Does anybody want to share where they install their 24/12 converter in their Pinz? Also where do you tie it into on the 24v side. Pictures would be helpful. thank you.
Roger Melton

User avatar
Posts: 109
Joined: Sun Aug 24, 2008 12:06 pm
Location: Guatemala

Post by karoja » Tue Feb 23, 2010 10:51 am

Hi Pols497,

I installed both a 24/12 and a 24/110 convertor in my rig, to power a microwave oven. Not wanting to get stuck with a dead battery bank, I installed a second battery bank in the tool box, and linked both with a battery integrator. For ideas check here:
712 Camper / 710 M

User avatar
Posts: 2450
Joined: Thu Mar 16, 2006 6:48 pm
Location: Denver, CO USA

converter install

Post by krick3tt » Tue Feb 23, 2010 4:54 pm

I installed the converter above the passenger head cushion. ... MG3596.jpg

Ran the supply from the 24v tap at the radio connection...through a switch (per Jim)... ... MG3598.jpg a fuse block at the overhead for the radio and the CB and a 12v plug for the GPS. ... MG3594.jpg
Any man who thinks he can be happy and prosperous by letting the government take care of him:
better take a closer look at the American Indian.---Henry Ford

User avatar
Posts: 628
Joined: Mon Oct 12, 2009 10:31 pm
Location: Washington

Post by totaljoint » Tue Feb 23, 2010 6:37 pm

Mine was installed on the steering column, just behind the knee guard.

Post Reply