Hello Folks,
Working in tight quarters, as I replaced 2 of my circuit breakers, I realized that many of breakers have 2 wires on one side and one on the other.
After replacing two breakers, I seem to have 2 wires left in the back. One is an all green color and the other is a black with darkgreeish spots.
Anyone know what side these go in ? May be I need to add one of each to the red ?
Let me know.
regards,
Peresh.
Changing Breaker Question
Changing Breaker Question
Last edited by Peresh on Wed Jul 04, 2012 3:29 pm, edited 1 time in total.
Re: Changing Breaker Question
Hey Paresh,
I know what you mean about tight quarters. If you disconnect the speedo cable you'll have a ton more room to work with. Also drop the knee pad.
Green #10 on the driver's side of the breaker. Green w black dots #11 on the passenger side.
I know what you mean about tight quarters. If you disconnect the speedo cable you'll have a ton more room to work with. Also drop the knee pad.
Green #10 on the driver's side of the breaker. Green w black dots #11 on the passenger side.
'76 710K