Extra Brake light

Dedicated to the memory and knowledge shared by Jim Mettler - All things relating to the flow of electrons in a Pinz.
Post Reply
User avatar
mopar
United States of America
Posts: 439
Joined: Mon Jul 05, 2010 9:15 pm
Location: Metrowest MA

Extra Brake light

Post by mopar » Sat Mar 16, 2013 7:48 am

So I added a red LED extra brake light but I can't find the orange brake light wire I followed it in the main harness but it doesn't come out in the end. I checked at the lights and at the trailer connector. Is there a junction box somewhere that I lose it at? I also figured out the signal lights and brake light wires I have are the same so it would flash when signaling. Al my signal lights are connected in the trailer conector so If I disconnect the wires there I lose all my lights. I was gonna use the pink wire but I can't find it under the dash to jump it to the brake switch. Any pointers or help?

This is the brake light I'm using nice and Bright and fits nice.
http://www.etrailer.com/Trailer-Lights/ ... L69RB.html

1974 710M AKA the project truck
1987 718M Now Sold
1975 Volvo TGB1111 Now Sold
1973 Pinzgauer 712M x2 Now Sold
1963 404S Now Sold

Post Reply