Page 1 of 1
Parking brake disc rivets
Posted: Sun Jul 02, 2017 8:56 am
by pinzinator
Re: Parking brake disc rivets
Posted: Sun Jul 02, 2017 1:31 pm
by undysworld
Probably something like this:
http://www.homedepot.com/p/Prime-Line-S ... lsrc=aw.ds
But it may be better to consult whomever you got them from?
Re: Parking brake disc rivets
Posted: Sun Jul 02, 2017 2:08 pm
by pinzinator
Amazing that Home Depot offers such a tool but Harbor Freight doesn't. I found the same item on EBay for about the same price and ordered it. I have to set 24 rivets in all, one extra was included. That means I have to have a 96% success rate, I hope it's my lucky day.
Thanks for the tip!
Re: Parking brake disc rivets
Posted: Sun Jul 02, 2017 4:53 pm
by David Dunn
Though I have a punch and anvil for some types of those rivets, I generally use a center punch, and dress it with a flat punch if need be.
Re: Parking brake disc rivets
Posted: Wed Jul 05, 2017 6:18 pm
by pinzinator
I was able to get the rivets installed rather easily today with a $7.47 tool that I bought on EBay. I had an anvil (the small round thing), which I placed on a metal plate for support, and squared everything up before swinging the hammer. No mistakes, so I have 1 rivet leftover. I'll reinstall everything into the Pinzgauer tomorrow and Friday and post photos.
Note- 4 rivets were installed in one direction, 8 were installed from the opposite direction.
Re: Parking brake disc rivets
Posted: Wed Jul 05, 2017 7:42 pm
by TechMOGogy
Nice!!