Newbie question....
Is this the correct jacking point? Is the rear similar? Thanks!
Jacking Points....
Jacking Points....
- Attachments
-
- IMG_0294.JPG (1.86 MiB) Viewed 3236 times
Re: Jacking Points....
It's a good one, when using the Pinz jack. Though I never use the Pinz
jack in my "shop". I use a high lift floor jack, and typically lift under
the Diff with a block of wood to protect the Aluminum case. Then I
slip a Jack stand where you have the Pinz jack, lower the floor jack
somewhat then the wheel will lift a tad more. Thus having redundant
jack points for safety.
jack in my "shop". I use a high lift floor jack, and typically lift under
the Diff with a block of wood to protect the Aluminum case. Then I
slip a Jack stand where you have the Pinz jack, lower the floor jack
somewhat then the wheel will lift a tad more. Thus having redundant
jack points for safety.
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q