I know this has been covered a bunch, but nothing recently.
The last post I read suggested CWR as the only source for
hub steps, but it seems to me I saw them somewhere else.
There was a set with treading welded on, for extra traction.
What is the best source for hub steps these days? Or ...
again ... am I best off making my own?
Hub Steps
Re: Hub Steps
T-Lo's http://www.mogsrus.com/
Although I have the CWR flavor and a set
of Helicopter hub pick up's rare and not good
as a step.
Although I have the CWR flavor and a set
of Helicopter hub pick up's rare and not good
as a step.
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
-
- Posts: 244
- Joined: Wed Aug 28, 2013 12:47 pm
- Location: Houston, Texas
Re: Hub Steps
Talk to Andre, he supplied the set on my Pinz and I couldn't be happier. Whatever you do stay away from CWR unless you like to throw money away.
-1972 710M
Re: Hub Steps
I followed Morris' advice and mine have been going strong since.
krick3tt wrote:I've made the hub steps made from floor flange and pipe nipple and have had them for years. Made them for about $8 in parts from Home Depot. Put non skid on them and drilled a hole through the end and use a phillips screwdriver to spin them off if I am going to be in rocks.
I know everyone is all in a tizzy about spending upwards of $125 for parts for their pinz but these have done well for me for years.
Ottawa, Canada
1974 710M
2007 2WD Ural Patrol
1974 710M
2007 2WD Ural Patrol
Re: Hub Steps
PM me your email and I'll send you pics
Any man who thinks he can be happy and prosperous by letting the government take care of him:
better take a closer look at the American Indian.---Henry Ford
better take a closer look at the American Indian.---Henry Ford
Re: Hub Steps
I bought a set from CWR. I haven't installed them yet, but they look great, and he had them in stock. He even included neoprene gaskets to be sure of proper fitment. I'll post pics if anybody wants.