rims and tires

Issues with shocks/springs, tires, steering box, stopping, etc.
User avatar
Ian
Australia
Posts: 50
Joined: Tue Jan 01, 2013 5:46 am
Location: Tasmania

Re: rims and tires

Post by Ian »

New wheels (and rubber too) in place. These are the 2015 Ford Transit Custom rims 16". 60mm offset which must be a bit more than the original as they sit out about another 1/2 each compared to the old ones. Take a standard off the shelf wheel nut with a 60deg taper.

Also the 15" transit rim is identical and also goes straight on if anyone wanted to fit 15" tyres.


Image

Image
User avatar
ako
Posts: 159
Joined: Sat Jan 17, 2015 11:41 am
Location: UAE

Re: rims and tires

Post by ako »

They look like the bee's knees Ian. Nice work.
User avatar
TechMOGogy
Canada
Posts: 2831
Joined: Wed Feb 01, 2012 11:39 am
Location: Ontario, Canada

Re: rims and tires

Post by TechMOGogy »

So the question has finally been answered!!
They fit!
They look good and I guess the benefit of these is that they have the safety bead and can be run at a lower PSI
Any other benefits?
Cheers and thanks for posting - they look good!
Dan
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
User avatar
ako
Posts: 159
Joined: Sat Jan 17, 2015 11:41 am
Location: UAE

Re: rims and tires

Post by ako »

It is good news for us in the desert. We normally run 4x4s at 15 psi (1 bar). I would like to get some of these rims to see how they hold.
GRCameron
United States of America
Posts: 158
Joined: Tue May 27, 2014 7:32 pm
Location: Yarnell, AZ

Re: rims and tires

Post by GRCameron »

These look nice! Where to find 5 of them in Arizona? There must be some place in the Phoenix area...
George Cameron
Yarnell, AZ
1979 Pinz 710M
Molon Labe
krick3tt
Posts: 2457
Joined: Thu Mar 16, 2006 6:48 pm
Location: Denver, CO USA

Re: rims and tires

Post by krick3tt »

Maybe a group buy to save on cost...especially shipping. I could see the need for four.
Any man who thinks he can be happy and prosperous by letting the government take care of him:
better take a closer look at the American Indian.---Henry Ford
GRCameron
United States of America
Posts: 158
Joined: Tue May 27, 2014 7:32 pm
Location: Yarnell, AZ

Re: rims and tires

Post by GRCameron »

Ian, have you noticed any change in steering behavior with the different offset? Is bump steer is increased over the stock wheels?
George Cameron
Yarnell, AZ
1979 Pinz 710M
Molon Labe
User avatar
Ian
Australia
Posts: 50
Joined: Tue Jan 01, 2013 5:46 am
Location: Tasmania

Re: rims and tires

Post by Ian »

GRCameron wrote:Ian, have you noticed any change in steering behavior with the different offset? Is bump steer is increased over the stock wheels?
Will let you know, only just fitted them, but heading off on a trip today in it for a few days.
User avatar
VinceAtReal4x4s
Admin
United States of America
Posts: 2037
Joined: Mon Apr 12, 2004 10:36 pm
Location: Ca. or lost in South West USA
Contact:

Re: rims and tires

Post by VinceAtReal4x4s »

Very nice! The original look is perfect. Silver powder coating could work too.
"For those who risk, life has a flavor the protected shall never enjoy"

Your donation makes this site possible!

Image
one2many
Australia
Posts: 178
Joined: Sun Dec 22, 2013 5:53 pm
Location: Melbourne Australia

Re: rims and tires

Post by one2many »

They look really good!
Much better than having to modify for wheel nuts as I did.

I like the tyres too... I enquired recently about the same tyre in that size and was told it was discontinued in 255/85/16, I better ask elsewhere.
1985 pinzgauer 712K factory 2.7lt civilian (RHD, 4 door K)
1979 Volvo tgb 1314a (under construction to om606 diesel/722.6 trans. Dual cab/tray)
User avatar
TechMOGogy
Canada
Posts: 2831
Joined: Wed Feb 01, 2012 11:39 am
Location: Ontario, Canada

Re: rims and tires

Post by TechMOGogy »

one2many wrote:They look really good!
Much better than having to modify for wheel nuts as I did.

I like the tyres too... I enquired recently about the same tyre in that size and was told it was discontinued in 255/85/16, I better ask elsewhere.
They discontinued that product number but a new SKU comes out and they are available.
Check again for sure!
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
User avatar
Haf-e
United States of America
Posts: 822
Joined: Thu Oct 06, 2011 5:25 pm
Location: Mount Vernon WA USA

Re: rims and tires

Post by Haf-e »

Only one caution here - the Ford Transit "custom" is not the same as the new USA Ford Transit unfortunately - but I think it is very close - especially the wheels. Also, the USA rims have different shaped holes in them - I prefer the round holes used on the European/Australian Transit Custom as they look very much like the factory wheels on the diesel Pinzgauers - The holes in the USA rims are more oblong and there are only 10 of them.

So - still hoping we can have a verification of the USA Ford Transit rims - although I would expect that they work as well.

Image
Haf-e

1971 Pinzgauer 710M

Image
Disc Brake Conversion Kits for 710 and 712 Pinzgauers
www.klugewerks.com
one2many
Australia
Posts: 178
Joined: Sun Dec 22, 2013 5:53 pm
Location: Melbourne Australia

Re: rims and tires

Post by one2many »

Ian,

I meant to ask in my previous post, what is the width of the 2015 transit rims?
1985 pinzgauer 712K factory 2.7lt civilian (RHD, 4 door K)
1979 Volvo tgb 1314a (under construction to om606 diesel/722.6 trans. Dual cab/tray)
User avatar
Hotzenplotz
Austria
Posts: 371
Joined: Wed Jan 18, 2012 9:07 am
Location: Vienna, Austria

Re: rims and tires

Post by Hotzenplotz »

Folks

I got the European dimensions from an Austrian webshop

Image
Cheers
Albert
========================
My Pinz has NEVER been with any army
stiffler4444
Canada
Posts: 776
Joined: Mon Mar 15, 2010 1:46 pm
Location: Crystal Beach ON CAN

Re: rims and tires

Post by stiffler4444 »

Haf-e wrote:Only one caution here - the Ford Transit "custom" is not the same as the new USA Ford Transit unfortunately - but I think it is very close - especially the wheels. Also, the USA rims have different shaped holes in them - I prefer the round holes used on the European/Australian Transit Custom as they look very much like the factory wheels on the diesel Pinzgauers - The holes in the USA rims are more oblong and there are only 10 of them.

So - still hoping we can have a verification of the USA Ford Transit rims - although I would expect that they work as well.

Image
Correct on the description. I am going to (try and remember) and bring home the spare off of my 2015 transit cargo and fit it this weekend. I will post up results. I'm not very photo techy, but my BBZ30 photos are too large to post up. Any suggestions on resizing?

thanks in advance,
Dave
1972 710m
Post Reply