I have a 74 710m that has the antenna mount on the topside. The mount has bolt holes to attach the antenna receiver. I have the mount on the truck (obviously) and found a receiver and whip etc, but I don't have any bolts to attach it. Does anyone know what size/type of bolts I need to mount a standard antenna receiver to the Pinzgauer roof mount?
Thanks in advance for any help!
Bolt size to mount antenna?
Re: Bolt size to mount antenna?
I figured smarter people would have chimed in,I will compare and let you know,going out to the shop later.
Mark
Mark
Stock means no imagination!
Volvo TGB1317, .95% Morphed!
68 Haffy
Volvo TGB1317, .95% Morphed!
68 Haffy
- westernair
- Posts: 748
- Joined: Sat Jan 01, 2011 11:14 pm
- Location: Tacoma, WA
Re: Bolt size to mount antenna?
Not much help from me but I can say it is a common metric bolt. I built a roof rack suport and attached it to the antenna mount. When I did so I just dug through one of my misc bolt bins and found several that fit.
I don't have a bolt sizer or thread gage to check
I don't have a bolt sizer or thread gage to check
Shawn
62 haffy Bantam
61 haffy 4 door
72 710K - Sold
73 712M - Sold
62 haffy Bantam
61 haffy 4 door
72 710K - Sold
73 712M - Sold
Re: Bolt size to mount antenna?
10mm X 1.50 ,length as needed.
Stock means no imagination!
Volvo TGB1317, .95% Morphed!
68 Haffy
Volvo TGB1317, .95% Morphed!
68 Haffy
Re: Bolt size to mount antenna?
The spare parts catalog shows
Group 26 05, M8x30
Group 31 36, M6x25 or M8x45 or M8x30
Depends on the configuration you have.
Group 26 05, M8x30
Group 31 36, M6x25 or M8x45 or M8x30
Depends on the configuration you have.
Cum catapultae proscriptae erunt tum soli proscript catapultas habebunt.