Width of rear side doors on a "K" pinzgauer?

All things body, interior, paint, windows, tops... you know.
Post Reply
User avatar
Haf-e
United States of America
Posts: 822
Joined: Thu Oct 06, 2011 5:25 pm
Location: Mount Vernon WA USA

Width of rear side doors on a "K" pinzgauer?

Post by Haf-e » Fri Feb 16, 2018 3:54 pm

Can anyone get me a dimension of the rear door width or, preferrably, the window opening dimensions?

Looking at buying some of the sliding glass from Dave Dunn for a project I am doing.

Thanks!
Haf-e

1971 Pinzgauer 710M

Image
Disc Brake Conversion Kits for 710 and 712 Pinzgauers
www.klugewerks.com

User avatar
rmel
United States of America
Posts: 771
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: Width of rear side doors on a "K" pinzgauer?

Post by rmel » Fri Feb 16, 2018 6:56 pm

I can send you that tomorrow morning. Outta town at the moment. You want the opening frame edge to frame edge or the inside jams where the felt runners are?


Sent from my iPhone using Tapatalk
Puller: 710K 2.7L EFI
Follower: Sankey MK 3, 3/4 Tonne
Driver: Ron // KO0Q

User avatar
Haf-e
United States of America
Posts: 822
Joined: Thu Oct 06, 2011 5:25 pm
Location: Mount Vernon WA USA

Re: Width of rear side doors on a "K" pinzgauer?

Post by Haf-e » Fri Feb 16, 2018 8:12 pm

Really just need the outside opening size of the window in the door where the glass is.
Haf-e

1971 Pinzgauer 710M

Image
Disc Brake Conversion Kits for 710 and 712 Pinzgauers
www.klugewerks.com

User avatar
rmel
United States of America
Posts: 771
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: Width of rear side doors on a "K" pinzgauer?

Post by rmel » Sat Feb 17, 2018 11:25 am

Here you go...BOTH windows measured exactly the same

621mm x 414mm
Puller: 710K 2.7L EFI
Follower: Sankey MK 3, 3/4 Tonne
Driver: Ron // KO0Q

User avatar
David Dunn
Posts: 2151
Joined: Wed Apr 14, 2004 7:08 pm
Location: Arcadia, CA

Re: Width of rear side doors on a "K" pinzgauer?

Post by David Dunn » Sat Feb 17, 2018 12:21 pm

Haf-e needs the opening size, we know the glass size. It's different than the TD door opening or I could give it.
.
The Trojan Horse... the 1st Pinz used to covertly carry troops into battle .




ATL Pinzgauer XM 718K TUM(HD) 6x6 FFR (aka The Green Grail)

User avatar
Haf-e
United States of America
Posts: 822
Joined: Thu Oct 06, 2011 5:25 pm
Location: Mount Vernon WA USA

Re: Width of rear side doors on a "K" pinzgauer?

Post by Haf-e » Sat Feb 17, 2018 1:07 pm

Thanks - but as Dave said - I need the opening size to see if I can make it work with some window frames I am considering making for the side of my pinz.

Haf-e
Haf-e

1971 Pinzgauer 710M

Image
Disc Brake Conversion Kits for 710 and 712 Pinzgauers
www.klugewerks.com

User avatar
rmel
United States of America
Posts: 771
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: Width of rear side doors on a "K" pinzgauer?

Post by rmel » Sat Feb 17, 2018 3:56 pm

That's what I had thought you would be looking for :wink:

OK, here's the new measurements.

635mm x 430mm

That would include the felt runners. I have relatively new felt
but I did keep the old ones that were in decent shape. These
measure 4.5mm from where the glass sits to the backside metal frame.

So the TOTAL metal to metal would be approximately 644mm x 439mm

Hope this helps, if you need another measurement met me know.

ron
Puller: 710K 2.7L EFI
Follower: Sankey MK 3, 3/4 Tonne
Driver: Ron // KO0Q

Post Reply