Horn Mounting

All things body, interior, paint, windows, tops... you know.
Post Reply
Posts: 141
Joined: Mon Nov 06, 2006 1:08 am
Location: Brisbane, Australia

Horn Mounting

Post by SAM. C. » Wed Jun 13, 2018 5:57 am

Hi All

I have replaced all of my sound deadening (with Megasorber) In doing so I took the horn off. Now I have finished the job I couldn’t remember exactly how it went back but I have bolted the 3 springy strips to the back of the horn and at the bottom to the angle bracket. Trouble is the horn tilts forward a lot. I can see no obvious way to mount it differently and I really don’t want to start bending stuff.

Got any ideas? Even a picture would be great.



User avatar
Posts: 516
Joined: Fri Feb 22, 2008 12:00 pm
Location: near Geneva, Switzerland

Re: Horn Mounting

Post by GenevaPinz » Fri Jun 15, 2018 7:58 am

I mounted mine in place of the convoy light, so it faces directly the hole in the front grille. I had to build (big word for the work involved) a small "adapter" from a small flat piece of steel to get the correct height. No need to touch the electric wiring as it is just next to the original emplacement.

Hope it helps...

'72 Pinzgauer 710M

Post Reply