3M Adhesive Remover

All things body, interior, paint, windows, tops... you know.
Post Reply
User avatar
rmel
United States of America
Posts: 918
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

3M Adhesive Remover

Post by rmel » Sat Apr 06, 2019 11:19 am

If you have ever stripped and replaced the door rubbers you probably found removing
the underlying adhesive was no fun aka 3M's "Yellow or Black snot". Which I just did
for my 712 "gussyup" project.

Well it's pretty rare when you get a product and it performs far better than expected.
This stuff from 3M is absolutely amazing. It's citrus based and actually smells good.
After removing the rubbers (tip: use a heat gun), spay this stuff on and all that old
snot just wipes right off with no effort.

https://www.amazon.com/gp/product/B000B ... UTF8&psc=1
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712M

Driver: Ron // KO0Q

Jake2015
United States of America
Posts: 58
Joined: Wed Apr 15, 2015 12:18 pm
Location: Phoenix, AZ

Re: 3M Adhesive Remover

Post by Jake2015 » Sun Apr 14, 2019 8:32 pm

Did you replace with standard weather strip from SAV or something else?
_________________
Southwest Pinzgauer Association Member
1977 Austrian 712K
http://www.swpinz.com
Facebook: Southwest Pinzgauer

User avatar
rmel
United States of America
Posts: 918
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: 3M Adhesive Remover

Post by rmel » Sun Apr 14, 2019 8:38 pm

SAV
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712M

Driver: Ron // KO0Q

Post Reply