Original Swiss Reflector and Eberspacher BN4 BN 4 Heater parts
Posted: Sat Nov 02, 2019 1:06 am
Gents, (Any lady driving a Pinz here?)
My reflectors on my Pinz were burnt by sun and time. SAV offers a replacement but you have to drill new holes... not my type of thing. Therefore, I bought I set from the local hardware store and printed adapters to make them fit in the original Swiss frame.
I have also printed and assembled a replacement pressure regulator diaphragm for the Eberspacher BN4 (the ones installed in the 710K and ambulances) and the flat o-ring that mounts by the solenoid valve.
Check pics.
Anyone interested, send me a text message. 404 747 12 nine 4
Jerome
My reflectors on my Pinz were burnt by sun and time. SAV offers a replacement but you have to drill new holes... not my type of thing. Therefore, I bought I set from the local hardware store and printed adapters to make them fit in the original Swiss frame.
I have also printed and assembled a replacement pressure regulator diaphragm for the Eberspacher BN4 (the ones installed in the 710K and ambulances) and the flat o-ring that mounts by the solenoid valve.
Check pics.
Anyone interested, send me a text message. 404 747 12 nine 4
Jerome