Air tunnel insulation

All things body, interior, paint, windows, tops... you know.
Post Reply
jan.bauwmans
Posts: 16
Joined: Mon Nov 01, 2021 6:57 am

Air tunnel insulation

Post by jan.bauwmans »

I still have the foam inside the air tunnel. It's fixed with steel clips. Is it not better to remove it ? Afraid there is rust building up underneath. What is the purpose of this foam? Noise reduction or dust catcher ? Image

Verstuurd vanaf mijn SM-G998B met Tapatalk

User avatar
rmel
United States of America
Posts: 1395
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: Air tunnel insulation

Post by rmel »

Insulation both temp and noise.

I removed mine from the 712 as it was in terrible shape.
It was fairly easy to remove using a Heat Gun, spatula, and some patience.

I ended up applying a Noise deadening material that you can roll on or brush
apply, takes several applications to get a 4mm to 5mm overall thickness. This
product has rust inhibitors, is high temp, and water proof. It's a Polymer base.
My wind tunnel ended up rust free.

Here's a link to the product I used as an FYI

https://www.secondskinaudio.com/sound-d ... rum-liquid
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
ChickenPinz
United States of America
Posts: 327
Joined: Tue Feb 11, 2020 7:16 pm

Re: Air tunnel insulation

Post by ChickenPinz »

Does anyone know if there's a replacement material for the original that's closer to the foam type material?
710K
whitesik
United States of America
Posts: 223
Joined: Thu Apr 02, 2015 2:11 pm
Location: Indiana, U.S.A.

Re: Air tunnel insulation

Post by whitesik »

I used 1/2" Dynaliner and it worked very well. I made cardboard templates to get the correct sizes for the pieces before applying it.

https://www.dynamat.com/products/dynaliner/
75 Swiss 710K
Not so new owner but still a novice
W9YG
Post Reply