I noticed the window seals were the same as ones fitted to Mini's so I bought 5m from here (at only £3.99/m):
http://www.northeasternrubber.com/epage ... ts/NER2289
Offered it up into the channel today and it fits really well:
I'm going to cut them to fit like this:
So the top one is supported by the side ones and the sides one are held in by the bottom on. The seal is pretty snug so shouldn't need gluing in but I might bung some silicone on the back anyway
New window seals (bargain)
New window seals (bargain)
--
Robin
Pinzgauer 710K
MegaJolt ignition
(upgrading to MicroSquirt)
Robin
Pinzgauer 710K
MegaJolt ignition
(upgrading to MicroSquirt)
-
- Posts: 545
- Joined: Mon Jan 03, 2005 1:33 pm
- Location: San Juan Mountains, CO
-
- Posts: 1776
- Joined: Fri Apr 16, 2004 8:08 am
- Location: Blue Mounds, WI
-
- Posts: 130
- Joined: Wed Aug 25, 2004 12:30 pm
- Location: Ayrshire, Scotland.
-
- Posts: 1776
- Joined: Fri Apr 16, 2004 8:08 am
- Location: Blue Mounds, WI
You may be a tightwad, but you're a lucky tightwad. You can at least get 'em. Take a look at this response from them:
Hi Paul.
Due to the excessive charges levied by UK mail operators it is not possible for us to effectivly operate a recorded delivery system out side the UK.
Thank you for your interest and sorry we are unable to assist you.
Best Regards
John
Hi Paul.
Due to the excessive charges levied by UK mail operators it is not possible for us to effectivly operate a recorded delivery system out side the UK.
Thank you for your interest and sorry we are unable to assist you.
Best Regards
John