canvas top patch
canvas top patch
I have a pin hole and a half inch cut in my canvas top. What is the best method of patching these.....Should I use a piece of the old canvas top. thanks again Zig
- westernair
- Posts: 748
- Joined: Sat Jan 01, 2011 11:14 pm
- Location: Tacoma, WA
Re: canvas top patch
Personally, yes use a piece of original
material if you have it. Apply a good vinyl glue to both halves, let it dry and then firmly press it on. The rubber cement glue type adhesive seems to work best for me.
material if you have it. Apply a good vinyl glue to both halves, let it dry and then firmly press it on. The rubber cement glue type adhesive seems to work best for me.
Shawn
62 haffy Bantam
61 haffy 4 door
72 710K - Sold
73 712M - Sold
62 haffy Bantam
61 haffy 4 door
72 710K - Sold
73 712M - Sold
Re: canvas top patch
There are a couple methods, but many guys seem to use HH-66 vinyl cement. I used two products made by the same company, one for canvas and one for vinyl, which also worked well. Both are translucent products. When used on canvas tops, and really pressed down, they are somewhat hard to see.
For the canvas:
For the vinyl windows:
For the canvas:
For the vinyl windows:
Ottawa, Canada
1974 710M
2007 2WD Ural Patrol
1974 710M
2007 2WD Ural Patrol