Side Rails from Tim
Side Rails from Tim
I finally installed my side rails on the truck. These, like my bumper, were made by Tim. Not the greatest pics, but you get the idea. They are mounted like my previous rail, using the rubber wellnuts
Sent from my Nexus 4 using Tapatalk
Sent from my Nexus 4 using Tapatalk
Ottawa, Canada
1974 710M
2007 2WD Ural Patrol
1974 710M
2007 2WD Ural Patrol
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada
- audiocontr
- Posts: 1868
- Joined: Fri May 01, 2009 1:30 pm
- Location: Buffalo NY
Re: Side Rails from Tim
love them! How much?
1973 712m
1968 Haflinger
1965 Pathfinder
1978 GMC Palm Beach (Hey, its got 6 wheels!!)
1968 Haflinger
1965 Pathfinder
1978 GMC Palm Beach (Hey, its got 6 wheels!!)
Re: Side Rails from Tim
I got the type 1 for the 710.audiocontr wrote:love them! How much?
Here are Tim's prices based on the SWPinzgauer.org forum.
Pinzgauer side rails Type 1 $500.00 Type 2 $600.00 for 710's
Pinzgauer side rails Type 1 $600.00 Type 2 $700.00 for 712'S
Ottawa, Canada
1974 710M
2007 2WD Ural Patrol
1974 710M
2007 2WD Ural Patrol
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada
Re: Side Rails from Tim
I forget - how did you get them up here?
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
Re: Side Rails from Tim
They look great!
I used rivet nuts for my side rails but well nuts are much easier I imagine and should hold up just fine.
I used rivet nuts for my side rails but well nuts are much easier I imagine and should hold up just fine.
Paul C.
_________
'73 Swiss 710M
'89 Puch 230GE
_________
'73 Swiss 710M
'89 Puch 230GE
Re: Side Rails from Tim
They were shipped to Ogdensburg, NY and I drove the 45 minutes to get them.TechMOGogy wrote:I forget - how did you get them up here?
Ottawa, Canada
1974 710M
2007 2WD Ural Patrol
1974 710M
2007 2WD Ural Patrol
Re: Side Rails from Tim
I could have drilled the rail holes out to accommodate the rubber wellnut head, so it appeared flush, and use a bigger washer, but this works.pcolette wrote:They look great!
I used rivet nuts for my side rails but well nuts are much easier I imagine and should hold up just fine.
Ottawa, Canada
1974 710M
2007 2WD Ural Patrol
1974 710M
2007 2WD Ural Patrol
- audiocontr
- Posts: 1868
- Joined: Fri May 01, 2009 1:30 pm
- Location: Buffalo NY
Re: Side Rails from Tim
How much was shipping?
1973 712m
1968 Haflinger
1965 Pathfinder
1978 GMC Palm Beach (Hey, its got 6 wheels!!)
1968 Haflinger
1965 Pathfinder
1978 GMC Palm Beach (Hey, its got 6 wheels!!)
Re: Side Rails from Tim
It all depends on where it goes and mine included the bumper too, so I cannot give you an accurate number. It was under $200.audiocontr wrote:How much was shipping?
Ottawa, Canada
1974 710M
2007 2WD Ural Patrol
1974 710M
2007 2WD Ural Patrol
-
- Posts: 776
- Joined: Mon Mar 15, 2010 1:46 pm
- Location: Crystal Beach ON CAN