Custom Center Console

Build projects, things that guys have come up with to make a Pinz better (or worse?) and aftermarket add-ons.
whitesik
United States of America
Posts: 84
Joined: Thu Apr 02, 2015 2:11 pm
Location: Indiana, U.S.A.

Re: Custom Center Console

Post by whitesik » Thu Oct 26, 2017 12:03 pm

Any updates on this? I keep checking the SWPinz site.
75 Swiss 710K
Not so new owner but still a novice

User avatar
DeStoriesair
Posts: 25
Joined: Mon Jan 05, 2015 9:02 pm
Location: Mesa, Az

Re: Custom Center Console

Post by DeStoriesair » Thu Oct 26, 2017 1:21 pm

Sorry for the delay. I had been wrapped up with the Treffen. Now that it is over I will get the consoles going :)
Southwest Pinzgauer Association Member
Pinzgauer 710M
http://www.swpinz.com
Facebook: Southwest Pinzgauer

User avatar
DeStoriesair
Posts: 25
Joined: Mon Jan 05, 2015 9:02 pm
Location: Mesa, Az

Re: Custom Center Console

Post by DeStoriesair » Tue Nov 28, 2017 8:41 am

I have been a little delayed with the center consoles. i have 4 mostly completed but I am needing to get one complete to get some pictures and put them on the website. Once I do that I will open the ordering and get them shipped out as they are made.
Thanks
Justin
Southwest Pinzgauer Association Member
Pinzgauer 710M
http://www.swpinz.com
Facebook: Southwest Pinzgauer

User avatar
DeStoriesair
Posts: 25
Joined: Mon Jan 05, 2015 9:02 pm
Location: Mesa, Az

Re: Custom Center Console

Post by DeStoriesair » Tue Dec 05, 2017 2:51 pm

I posted up on www.swpinz.com some center consoles that are available.
Southwest Pinzgauer Association Member
Pinzgauer 710M
http://www.swpinz.com
Facebook: Southwest Pinzgauer

User avatar
TechMOGogy
Canada
Posts: 2608
Joined: Wed Feb 01, 2012 11:39 am
Location: Ontario, Canada

Re: Custom Center Console

Post by TechMOGogy » Tue Dec 05, 2017 7:47 pm

Can you post a picture of how they mount/seal?
I know they use the stock small clips but do they seal out the noise as well (or better) than the stock lid?
Thx
72 Pathfinder | 75 710M 2.7i | 94 350GDT | 96 350GDT Worker

User avatar
4x4Pinz
Posts: 895
Joined: Sat Oct 24, 2009 6:17 pm
Location: arizona

Re: Custom Center Console

Post by 4x4Pinz » Wed Dec 06, 2017 5:18 pm

I used some go density weather stripping with self sticky tape on one side to seal mine. Keeps the water, dust and noise out. It has been way too long for me to remember if there was a sound difference. I know it keeps the small items from bouncing around inside the truck as the tentation to put things on the inspection cover is always there and of course keeps the drinks close at hand.

User avatar
DeStoriesair
Posts: 25
Joined: Mon Jan 05, 2015 9:02 pm
Location: Mesa, Az

Re: Custom Center Console

Post by DeStoriesair » Tue Dec 12, 2017 10:26 am

All you do for installation is remove the existing lid, set the console in that location, there is a cutout to fit around the opening. Once in place you use the front and back latches to hold it down. I can not say anything about the noise reduction since I never drove one with the lid.
Southwest Pinzgauer Association Member
Pinzgauer 710M
http://www.swpinz.com
Facebook: Southwest Pinzgauer

User avatar
DeStoriesair
Posts: 25
Joined: Mon Jan 05, 2015 9:02 pm
Location: Mesa, Az

Re: Custom Center Console

Post by DeStoriesair » Mon Apr 16, 2018 3:35 pm

There are 3 more center consoles left at www.swpinz.com. Great for holding your drinks and storing your belongings that you want to keep close.
Southwest Pinzgauer Association Member
Pinzgauer 710M
http://www.swpinz.com
Facebook: Southwest Pinzgauer

Post Reply