Smart Car Seats

Build projects, things that guys have come up with to make a Pinz better (or worse?) and aftermarket add-ons.
User avatar
totaljoint
Posts: 632
Joined: Mon Oct 12, 2009 10:31 pm
Location: Washington

Re: Smart Car Seats

Post by totaljoint »

They worked great in the rear of my G:
0ED10928-384E-4F3C-B412-9E25A476DA6E.jpeg
0ED10928-384E-4F3C-B412-9E25A476DA6E.jpeg (862.56 KiB) Viewed 7321 times
715DFA96-8DCA-4D61-93DE-164F09CD7964.jpeg
715DFA96-8DCA-4D61-93DE-164F09CD7964.jpeg (1.83 MiB) Viewed 7321 times
User avatar
Andre
United States of America
Posts: 960
Joined: Fri May 12, 2006 10:41 pm
Location: Winnsboro Tx
Contact:

Re: Smart Car Seats

Post by Andre »

I’ll be in So Cal this weekend. I can help get the seats mounted for anyone wanting to do so.
Fat Fabrications
2993 FM 1647
Winnsboro, TX. 75494
fatfabrications@yahoo.com
(903) 365-2332 shop
(951) 765-7224 mobile
Facebook.com/dokapinz6x6
Www.fatfabrications.com
User avatar
pcolette
United States of America
Posts: 1614
Joined: Sun Dec 10, 2006 7:38 pm
Location: Southwest Wisconsin

Re: Smart Car Seats

Post by pcolette »

totaljoint, Are those the Scheel-Mann seats you have in the front? And if they are, what do you think of them? I've been very tempted to add them to mine but the price has so far kept me from doing it.
Paul C.
_________
'73 Swiss 710M
'89 Puch 230GE
User avatar
totaljoint
Posts: 632
Joined: Mon Oct 12, 2009 10:31 pm
Location: Washington

Re: Smart Car Seats

Post by totaljoint »

Are those the Scheel-Mann seats you have in the front? And if they are, what do you think of them? I've been very tempted to add them to mine but the price has so far kept me from doing it.
Yes, those are the Scheel Mann seats.
Love 'em. I can't compare them to other- more affordable brands as they are the only ones I've tried, but they were very comfortable for the drive from San Francisco to Port Townsend. Seem to be very durable fabric too. I especially like that they don't have high bolsters on the seat sides. So much easier to slide in and out in the raised truck.
Ed
User avatar
totaljoint
Posts: 632
Joined: Mon Oct 12, 2009 10:31 pm
Location: Washington

Re: Smart Car Seats

Post by totaljoint »

Are those the Scheel-Mann seats you have in the front? And if they are, what do you think of them? I've been very tempted to add them to mine but the price has so far kept me from doing it.
Yes, those are the Scheel Mann seats.
Love 'em. I can't compare them to other- more affordable brands as they are the only ones I've tried, but they were very comfortable for the drive from San Francisco to Port Townsend. Seem to be very durable fabric too. I especially like that they don't have high bolsters on the seat sides. So much easier to slide in and out in the raised truck.
To be fair, I get more compliments on the smart seats!
Ed
User avatar
rmel
United States of America
Posts: 1394
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: Smart Car Seats

Post by rmel »

The chap in San Diego is still parting out Smart Car Fortwo's so I picked
up a set of seats for my 712 project.

Plan is to use the lower portion of the Pinz seat frame and weld these
seats in as others have. But...I'm wondering how far down does one strip
down the Seat frames? The PIX's on this thread don't match the seats I
have 100%, there may be variations. From what I can see, I need to take
apart the ball-bearing sliders, retain the top portion of the slider only
and re-bolt that back onto the Seat. If I don't the seat has no solid base,
but that just looks different than the PIX's on the tread so I thought I'd ask.
Last edited by rmel on Wed Feb 13, 2019 10:54 pm, edited 1 time in total.
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
Bruce Berger
Posts: 135
Joined: Wed Jan 24, 2007 9:39 pm
Location: Tehachapi, CA

Re: Smart Car Seats

Post by Bruce Berger »

Ill be interested to see how you mount your seats. I still haven’t mounted mine. Too many projects and not enough time.


Sent from my iPad using Tapatalk Pro
Bruce Berger
'72 Pinzgauer 710M 2.6i
mit Beck-LaGuardia Elektronischer Einspritzung
User avatar
4x4Pinz
United States of America
Posts: 1029
Joined: Sat Oct 24, 2009 6:17 pm
Location: arizona

Re: Smart Car Seats

Post by 4x4Pinz »

personally I mount mine with the frame only. never understand the idea of keeping the sliders and sitting a couple inches higher. with seat backs that actually lean forward and as small as the cab is in a pinz there really is no need to slide seat forward and back. I want the seat pan of the "donor" seat sitting as close to the pinz floor as possible. no complaints to date and have done a dozen or so modifications for folks.
User avatar
TechMOGogy
Canada
Posts: 2831
Joined: Wed Feb 01, 2012 11:39 am
Location: Ontario, Canada

Re: Smart Car Seats

Post by TechMOGogy »

Post a picture of your seats and that may us visualize it
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
User avatar
rmel
United States of America
Posts: 1394
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: Smart Car Seats

Post by rmel »

I’ll post some pix’s later today. Been constantly raining up here in
The Santa Cruz mountains and power finally called it quits. So will
Be a bit before I get back into this. But ya. I’m tossing the rails
I will need to retain a portion to bolt the two seat members together
This is the part that seems different that what others have encountered.
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
Sonarman
United States of America
Posts: 80
Joined: Sun Feb 05, 2017 8:15 pm
Location: Sonoma, Ca

Re: Smart Car Seats

Post by Sonarman »

I just tried to post pics of my Smart seat install. Keep getting HTTp error.
User avatar
rmel
United States of America
Posts: 1394
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: Smart Car Seats

Post by rmel »

Ya, I had trouble just posting text this morning, after submit I was taken to page
which then barfed up a fair amount of HTML error messages, although the posting
went through anyway.
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
User avatar
rmel
United States of America
Posts: 1394
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: Smart Car Seats

Post by rmel »

These rails are not easy to take apart, PIX below. I got my trusty angle grinder out
and lopped of one end of the bottom slider and that was enough to get the ball bearings
and other bits to come out freeing the slide to separate. I could not figure out what was
holding these in place. It should become a bit more evident why I need the top part of
the slider in the next PIX. The slider bolts together the bottom seat and hing for the backrest.
IMG_1934.jpg
IMG_1934.jpg (77.69 KiB) Viewed 7038 times
Now apart, the top portion of the slider is below. Two M6 Torx screws, one front and
one back attach the seat bottom. Two M8 Torx screws in the back attach to the seat
back hing. Without this member the seat parts would not be joined at the hing.
IMG_1935.jpg
IMG_1935.jpg (132.15 KiB) Viewed 7038 times
Yes the Pinz frame is upside down and I have not ground off the back frame yet, but it's
in position to show that this should work using the top portion of the slider. There is a
piece of steel looks like a handle in the center of that rail, that needs to be cut that is
interfering that was part of the rail interlock mechanism -- kiss that good by.
IMG_1936.jpg
IMG_1936.jpg (127.62 KiB) Viewed 7038 times
Although I think this is perhaps 1/2" higher than would be the case W/O this
member, there's lots more places to weld to. Torn between Torch brazing versus MIG,
my MIG is a POS though :(( gotta figure out how to heat shield the fabric.
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
User avatar
4x4Pinz
United States of America
Posts: 1029
Joined: Sat Oct 24, 2009 6:17 pm
Location: arizona

Re: Smart Car Seats

Post by 4x4Pinz »

for heat shield I am fortunate enough to still have some lead sheet. I use it a lot to keep sparks and heat away from things I don't want to get too hot. It is very moldable and real easy to form into any shape I need. even make it fit between material and supports when needed. works better then my fire blankets.
Derrickbwg
United States of America
Posts: 103
Joined: Sat Dec 16, 2017 8:09 pm
Location: TN

Re: Smart Car Seats

Post by Derrickbwg »

great pics...helps a lot!

Sent from my SM-G935V using Tapatalk

1975 710K
1974 710M
2018 G63
Post Reply