Page 3 of 5

Re: 710M rebuild

Posted: Fri Oct 14, 2016 4:52 pm
by VinceAtReal4x4s
I'd put this in the top 10 best looking Pinzies I've seen. The white, grey and black are an unexpected but great combo.

Re: 710M rebuild

Posted: Fri Oct 14, 2016 5:22 pm
by stiffler4444
VinceAtReal4x4s wrote:I'd put this in the top 10 best looking Pinzies I've seen. The white, grey and black are an unexpected but great combo.
Totally agree. I wouldn't have picked it, but now I love it!

710M rebuild

Posted: Sun Oct 16, 2016 7:49 pm
by TechMOGogy
I can take zero credit for the color combo!
I saw a Brian Mason truck about 4-5 years ago in Carlsbad. Just happened to be flying there the day it was posted for sale! I was 1st to see it and loved it but had just purchased my Hafi and was short on funds. It sold <2 hours after I saw it!
That truck was the inspiration for this project. It is actually in the sites rotating photo header (see shot below).
I think the color combo works as it is the same as snow camo (white, grey, black)
Image

Re: 710M rebuild

Posted: Sun Oct 16, 2016 10:36 pm
by Gear
Looks Awesome! While you are waiting to get it plated post more photographs. All angles and inside please. :mrgreen:

Re: 710M rebuild

Posted: Mon Oct 17, 2016 11:14 am
by TechMOGogy
Gear wrote:Looks Awesome! While you are waiting to get it plated post more photographs. All angles and inside please. :mrgreen:
Hey Justin!
For others here... Justin was the owner that white truck!!
Here are a few more pics.
IMG_7176.JPG
IMG_7176.JPG (93.26 KiB) Viewed 7203 times
IMG_7115.JPG
IMG_7115.JPG (94.13 KiB) Viewed 7203 times
IMG_7116.JPG
IMG_7116.JPG (76.15 KiB) Viewed 7203 times
IMG_7117.JPG
IMG_7117.JPG (72.74 KiB) Viewed 7203 times
Here is the Smart Car passenger seat - folds nice and flat - basically even with the engine cover
IMG_7143.JPG
IMG_7143.JPG (92.43 KiB) Viewed 7203 times

Re: 710M rebuild

Posted: Mon Oct 17, 2016 11:35 am
by TechMOGogy
Moar...
IMG_7144.JPG
IMG_7144.JPG (90.48 KiB) Viewed 7204 times
IMG_7147.JPG
IMG_7147.JPG (82.79 KiB) Viewed 7204 times
IMG_7190.JPG
IMG_7190.JPG (91.18 KiB) Viewed 7204 times
IMG_7191.JPG
IMG_7191.JPG (93.42 KiB) Viewed 7204 times
IMG_7184.JPG
IMG_7184.JPG (88.74 KiB) Viewed 7204 times

Re: 710M rebuild

Posted: Mon Oct 17, 2016 11:40 am
by Jimm391730
That's much too clean for a Pinzgauer! Nice.

Re: 710M rebuild

Posted: Mon Oct 17, 2016 11:40 am
by TechMOGogy
Bit more...
IMG_7167.JPG
IMG_7167.JPG (83.33 KiB) Viewed 7203 times
IMG_7160.JPG
IMG_7160.JPG (69.7 KiB) Viewed 7203 times
IMG_7158.JPG
IMG_7158.JPG (83.82 KiB) Viewed 7203 times
IMG_7161.JPG
IMG_7161.JPG (99.12 KiB) Viewed 7203 times
IMG_7175.JPG
IMG_7175.JPG (91.06 KiB) Viewed 7203 times

Re: 710M rebuild

Posted: Mon Oct 17, 2016 11:54 am
by TechMOGogy
Sorry for all the pics but wanted to give Jim L's work some photo time as well as Andre's :D
17.jpg
17.jpg (46.51 KiB) Viewed 7203 times
20.jpg
20.jpg (46.57 KiB) Viewed 7203 times
IMG_0997_zps2b02eb5e.jpg
IMG_0997_zps2b02eb5e.jpg (136.05 KiB) Viewed 7203 times

Re: 710M rebuild

Posted: Mon Oct 17, 2016 12:45 pm
by Andre
1462645165518.jpg
1462645165518.jpg (33.56 KiB) Viewed 7201 times

Re: 710M rebuild

Posted: Tue Oct 18, 2016 8:40 pm
by Texas710
You guys are just showing off now!

Love the pic's, super nice truck. Though, someone might have to walk me through the fuel delivery system...

Re: 710M rebuild

Posted: Tue Oct 18, 2016 9:30 pm
by 63rover
Your truck is done and home, Dave has ordered a drive shaft and u-js, Josh is likely good to go and I am always ready. Sounds like we need a southern Ontario gathering. Any favorites? Let's start a new thread and get the ball rolling. See who else is interested. Maybe some Hafis too.

Re: 710M rebuild

Posted: Wed Oct 19, 2016 12:32 am
by Jimm391730
...have to walk me through the fuel delivery system...
Airflow is through the stock filter, through the throttle body (visible behind the oil filler tube) and into the EFI manifold. The bar across the top is the pressure rail for the fuel; four injectors are right above each intake runner, shooting fuel straight down each intake. The higher end EMS system has sequential fuel delivery, each injector shoots fuel as each intake draws air. The front end of the pressure rail has the vacuum controlled pressure regulator (less fuel pressure at idle, more fuel pressure when vacuum drops as you put your foot into it). Mechanically it is very simple, very effective. The electronics on the other hand, while a simple "box", are much more involved but very capable.

Re: 710M rebuild

Posted: Wed Oct 19, 2016 5:47 am
by stiffler4444
63rover wrote:Your truck is done and home, Dave has ordered a drive shaft and u-js, Josh is likely good to go and I am always ready. Sounds like we need a southern Ontario gathering. Any favorites? Let's start a new thread and get the ball rolling. See who else is interested. Maybe some Hafis too.
I do think it's shaping up to be a good plan!

Re: 710M rebuild

Posted: Wed Oct 19, 2016 10:11 am
by TechMOGogy
63rover wrote:Your truck is done and home, Dave has ordered a drive shaft and u-js, Josh is likely good to go and I am always ready. Sounds like we need a southern Ontario gathering. Any favorites? Let's start a new thread and get the ball rolling. See who else is interested. Maybe some Hafis too.
Yup and I would like a bunch of us to do the Roaming Rally 2017!
http://graveltravel.ca/index.php?option ... Itemid=150