Brake Bleeding

Issues pertaining to the TGB/C30X series engine and driveline issues
Post Reply
jeepboy_90
Posts: 36
Joined: Wed Jul 30, 2014 12:01 am
Location: Northern California

Brake Bleeding

Post by jeepboy_90 » Fri Mar 31, 2017 8:17 pm

I have replaced all the wheel cylinders and brake lines. As I went to go through the process of bleeding the brake system, I went to start at the servo and there is no bleeder port as outlined in the manual. Just the banjo style fitting.

Do I just crack the banjo fitting open to bleed?

Thanks for any input. Ready to get back on the road.

Post Reply