Atik G wheels
-
- Posts: 60
- Joined: Wed Nov 08, 2006 1:40 am
- Location: Italy
Atik G wheels
The most common alu rims seen on TDs are Atik from G-wagen. Are there adaptation jobs to be done? Are longer bolts needed?
Thanks
Thanks
Pinz: 710 m, 710 ms, 710 k, 712 m fla, 712 k, 716 m, 718 m san, 716 k, 718 rehinbraun
Haflinger: 700, 703
G: 250, 270, 400, 350
Unimog 406
M825, M151 A2, M416
Fiat Panda 141A 4x4
Fresia F18
Haflinger: 700, 703
G: 250, 270, 400, 350
Unimog 406
M825, M151 A2, M416
Fiat Panda 141A 4x4
Fresia F18
-
- Posts: 436
- Joined: Wed Apr 14, 2004 2:53 pm
- Location: Vallejo, CA
- Contact:
Re: Atik G wheels
We are using a wheel on our tour conversions that is made in the UK for the Sprinter vans. They are relatively inexpensive, look good and are pretty much a bolt on conversion. You will have to change out the wheel studs to a Conical Lugbolt, we found the correct ones in Italy! Retail price in the U.S. is about $175 a wheel and $2 a lug bolt.
Cheers,
Scott
Cheers,
Scott
- Attachments
-
- img_0587sm5.jpg (77.23 KiB) Viewed 3638 times
Expedition Imports Corporation
Vallejo, California
www.expedition-imports.com
"You didn't buy a Chevy..." "Hows that Amazon tech support working out...."
Vallejo, California
www.expedition-imports.com
"You didn't buy a Chevy..." "Hows that Amazon tech support working out...."
Re: Atik G wheels
G Wagen rims fit if you ream out the mounting holes.
I cant recall how much but doable
Porsche ones don't fit as the central hub bore was too small. I just happened to get some Porsche rims to play with one day
I cant recall how much but doable
Porsche ones don't fit as the central hub bore was too small. I just happened to get some Porsche rims to play with one day
Regards
Mike
(Project Gimpy 2)
Mike
(Project Gimpy 2)
- VinceAtReal4x4s
- Admin
- Posts: 2042
- Joined: Mon Apr 12, 2004 10:36 pm
- Location: Ca. or lost in South West USA
- Contact:
Re: Atik G wheels
I can't recall for sure but aren't the stock steel/military Gwagen wheels the same as the steel TD wheels? Like the green ones on the back of that pic?
"For those who risk, life has a flavor the protected shall never enjoy"
Your donation makes this site possible!
Your donation makes this site possible!
Re: Atik G wheels
This is what Magna Steyr/Mercedes are fitting to all the Australian Military G-Wagens.
Peter
1974, 712 6X6 Pinzgauer
1983, 710-1.6 4X4 Pinzgauer
1997, 718 6X6 Pinzgauer (in pieces)
1971, 700 Haflinger
1974, 703 LWB Haflinger
2001, Range Rover
http://www.ozpinz.com
1974, 712 6X6 Pinzgauer
1983, 710-1.6 4X4 Pinzgauer
1997, 718 6X6 Pinzgauer (in pieces)
1971, 700 Haflinger
1974, 703 LWB Haflinger
2001, Range Rover
http://www.ozpinz.com
- VinceAtReal4x4s
- Admin
- Posts: 2042
- Joined: Mon Apr 12, 2004 10:36 pm
- Location: Ca. or lost in South West USA
- Contact:
Re: Atik G wheels
I like the older Euro/rest of the world military, or those newer Canadian mil. version:
- Attachments
-
- G.jpg (339.6 KiB) Viewed 2277 times
-
- bf14a51e2d50fef07e8beaec52231a73.jpg (59.99 KiB) Viewed 2277 times
"For those who risk, life has a flavor the protected shall never enjoy"
Your donation makes this site possible!
Your donation makes this site possible!
Re: Atik G wheels
The Hutchinson Wheels are my all time favourites (Canadian G) but at 876 euro each (I have seen them available a little cheaper from a few specialist suppliers) I think I'II be waiting for a Tattslotto win before I buy any.
http://www.puch.at/en/spare-parts/acces ... spx?LNG=en
http://www.puch.at/en/spare-parts/acces ... spx?LNG=en
Peter
1974, 712 6X6 Pinzgauer
1983, 710-1.6 4X4 Pinzgauer
1997, 718 6X6 Pinzgauer (in pieces)
1971, 700 Haflinger
1974, 703 LWB Haflinger
2001, Range Rover
http://www.ozpinz.com
1974, 712 6X6 Pinzgauer
1983, 710-1.6 4X4 Pinzgauer
1997, 718 6X6 Pinzgauer (in pieces)
1971, 700 Haflinger
1974, 703 LWB Haflinger
2001, Range Rover
http://www.ozpinz.com
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada
Re: Atik G wheels
Hutchinson's are great but once you go through rocks and bash up the 15 stud threads (x4 = 60) you'll be lucky to get them off without breaking them!
Some Hutchinson's come with the plastic nut caps but not a great solution.
Some Hutchinson's come with the plastic nut caps but not a great solution.
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker