Front door glass

Pretty much anything 716 or 718 technical that is not driveline or engine related.
Post Reply
User avatar
fesm_ndt
Posts: 252
Joined: Fri Jan 02, 2009 8:18 am
Location: Australia

Front door glass

Post by fesm_ndt »

I don't see this in the book..... and I thought straightforward but how does the glass come out? :oops:

I thought the 2 screws at the top but seems fairly solid even after taking them out.
Regards

Mike
(Project Gimpy 2)
User avatar
David Dunn
United States of America
Posts: 2274
Joined: Wed Apr 14, 2004 7:08 pm
Location: Arcadia, CA

Post by David Dunn »

Hi Mike,

You need to remove the door top . There are 2 bolts front and rear in the edges of the door ( under rubber caps, if still there), then the top lifts off ( watch for the placements of the steel shims). Then unbolt a pair of corner brackets and slide the frame apart.... It's been over 6 years since I changed mine... I might be a bit fuzzy on the details.... or I was drinking :roll: :wink:

Cheers :D
.
The Trojan Horse... the 1st Pinz used to covertly carry troops into battle .




ATL Pinzgauer XM 718K TUM(HD) 6x6 FFR (aka The Green Grail)
User avatar
fesm_ndt
Posts: 252
Joined: Fri Jan 02, 2009 8:18 am
Location: Australia

Post by fesm_ndt »

have to check that out today. I had been attacking it from the top :cry:
Regards

Mike
(Project Gimpy 2)
Post Reply