No brake lights. Creative way to replace with new switch?

Old forum posts ending on Oct 21 '09

Moderator: TechMOGogy

Erik712m
Posts: 1553
Joined: Sun Jan 21, 2007 7:52 pm
Location: Wichita, Kansas

Post by Erik712m »

I went and looked at the switch doesn't look any harder than replacing hub seals. I guess as red green often says if you can replace with oem parts you can with duct tape a hole lot easier. :lol: :lol:
User avatar
David Dunn
United States of America
Posts: 2274
Joined: Wed Apr 14, 2004 7:08 pm
Location: Arcadia, CA

Post by David Dunn »

The level of difficulty for some is based if it's equal to, or easier than popping a top on a brew... :roll:
.
The Trojan Horse... the 1st Pinz used to covertly carry troops into battle .




ATL Pinzgauer XM 718K TUM(HD) 6x6 FFR (aka The Green Grail)
ka
Posts: 445
Joined: Mon Jun 02, 2008 8:34 pm
Location: slc,scruz,chico,bldr,kalalau,flag,sb

Post by ka »

HEY WIZARDS!
glad to hear someone thinks it's easy... how do you replace that switch??!!
1973 710m
"it is not in the best interest of the shepherd to breed smarter sheep." ~ author unknown

press any key to continue or any other key to quit. ~author confidential
M Wehrman
United States of America
Posts: 847
Joined: Thu Apr 15, 2004 9:46 pm
Location: Gilbert, Az.

Post by M Wehrman »

After considerable soul searching,I decided to share MY secret with you Ka......Lefty loosey and then Righty tighty! :lol: :lol: :lol: :lol:
Sorry ,couldn't pass that one up!
It's snug behind the m-cyl,I have small hands and wasn't any big deal. I did find a small pair of channelocks worked just fine for both the tighty and the loosey.
Stock means no imagination!


Volvo TGB1317, .95% Morphed!



68 Haffy
ka
Posts: 445
Joined: Mon Jun 02, 2008 8:34 pm
Location: slc,scruz,chico,bldr,kalalau,flag,sb

Post by ka »

thx mark. so it is possible without special tools. will stick that data in my back pocket for lates. but i guess i would need to find someone with small hands, too. mine sure dont fit in there, and neither do any of my wrenches. oh well... good thing there's a gr8 work around.
1973 710m
"it is not in the best interest of the shepherd to breed smarter sheep." ~ author unknown

press any key to continue or any other key to quit. ~author confidential
Locked