Page 1 of 1

Wheel Spacers 1 inch thick - Pinzgauer 5x160

Posted: Tue Mar 28, 2017 5:50 pm
by Haf-e
Up for sale is a set of four custom made 1" / 25mm thick wheel spacers for the use with a 710M Pinzgauer - they include 20 of special lug nuts for mounting the spacers to the stock wheel studs of the Pinzgauer. These were made up for a friend's stock Pinzgauer wheels in order to increase the track width for better stability - but he just ordered a new set of wheels instead and will not need these now.

Moving the wheels outward slightly when using taller 33" tires keeps the tire's "contact patch" in the correct location and reduces wheel scrub / hard steering. No permanent modifications are required - they simply bolt on.

The spacers where made in the USA by a professional adapter company and are serialized. They cost $300 for the set. These adapters are in new condition with just mounting scratches - They have not been used other than test fitting them.

Looking for $250 for the set of four + the tapered lug nuts shipped.

I'll work on getting some pictures up on these soon.

Re: Wheel Spacers 1 inch thick - Pinzgauer 5x160

Posted: Wed Mar 29, 2017 8:45 am
by stiffler4444
PM'd, would love to take them off your hands

Re: Wheel Spacers 1 inch thick - Pinzgauer 5x160

Posted: Wed Mar 29, 2017 7:27 pm
by stiffler4444
Sent a couple PM's. sorry if duplicated but it's hard to tell what's sent and what's pending

Re: Wheel Spacers 1 inch thick - Pinzgauer 5x160

Posted: Wed Mar 29, 2017 8:35 pm
by Haf-e
Got them - replied back. I consider these ones to now be SOLD.

Re: Wheel Spacers 1 inch thick - Pinzgauer 5x160

Posted: Fri Mar 31, 2017 6:14 am
by stiffler4444
Hi Christopher, if you could PM me your address I'll get things taken care of. My message system is acting up and returning my messages to me, so not sure if you got my request yesterday.

thanks Dave

Re: Wheel Spacers 1 inch thick - Pinzgauer 5x160

Posted: Fri Mar 31, 2017 8:40 am
by Haf-e
PM sent.

Re: Wheel Spacers 1 inch thick - Pinzgauer 5x160

Posted: Fri Mar 31, 2017 1:02 pm
by stiffler4444
Ya, not getting my PM's definitely. Something is a miss. Please send me an email to my personal account, which is stiffler4444@hotmail.com. Let the spamming begin...lol.

Re: Wheel Spacers 1 inch thick - Pinzgauer 5x160

Posted: Fri Mar 31, 2017 2:39 pm
by David Dunn
stiffler4444 wrote:Ya, not getting my PM's definitely. Something is a miss. Please send me an email to my personal account, which is stiffler4444@hotmail.com. Let the spamming begin...lol.
Check each of your PM folders, that are probably max'ed out

Re: Wheel Spacers 1 inch thick - Pinzgauer 5x160

Posted: Fri Mar 31, 2017 3:10 pm
by stiffler4444
OK will do, thanks

Re: Wheel Spacers 1 inch thick - Pinzgauer 5x160

Posted: Wed Feb 24, 2021 11:58 am
by Daly944
Any chance you have the full specs needed to order another set of these? I've contacted US Wheel Adapters.com to make them, but need the following info:

5x160 is the proper pattern I believe (based on this thread)

What is the stud size/thread pitch?

Hub diameter

Maximum thickness that the stock logs can accommodate (is it 1 inch)?

Re: Wheel Spacers 1 inch thick - Pinzgauer 5x160

Posted: Wed Feb 24, 2021 12:52 pm
by rmel
You may want to contact Lenny at Motorsport Technology https://www.motorsport-tech.com/

I do have some good reason to believe his shop fabricated these Wheel spacers for Kludgeworks.
Haf-e has long vanished from the forum to ask him directly.

Re: Wheel Spacers 1 inch thick - Pinzgauer 5x160

Posted: Sat Feb 27, 2021 2:58 pm
by Daly944
Awesome, thank you for the reply!