WTB 710K Table and/or hardware

4x4's and 6x6's, parts, services and goods for sale. Dealers posting vehicle ads must donate something to the cause.
Post Reply
whitesik
United States of America
Posts: 223
Joined: Thu Apr 02, 2015 2:11 pm
Location: Indiana, U.S.A.

WTB 710K Table and/or hardware

Post by whitesik »

So, for all of you guys that have removed the tables to redo your interior, I would be very interested in one. I have a 710k that I am bringing back to near original configuration and unfortunately it did not come with the table or hardware. Any help, even just getting dimensions and good photos would be helpful. Thanks!
75 Swiss 710K
Not so new owner but still a novice
W9YG
whitesik
United States of America
Posts: 223
Joined: Thu Apr 02, 2015 2:11 pm
Location: Indiana, U.S.A.

Re: WTB 710K Table and/or hardware

Post by whitesik »

I am going to bump this. I thought I had a lead on a table but that has fallen through. Any help is appreciated!

Thanks,
Keith
75 Swiss 710K
Not so new owner but still a novice
W9YG
User avatar
Hotzenplotz
Austria
Posts: 371
Joined: Wed Jan 18, 2012 9:07 am
Location: Vienna, Austria

Re: WTB 710K Table and/or hardware

Post by Hotzenplotz »

I have built a wooden box with the size of the K-table
Made out of epoxy laminated plywood for maritime use
Image
Cheers
Albert
========================
My Pinz has NEVER been with any army
User avatar
rmel
United States of America
Posts: 1395
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: WTB 710K Table and/or hardware

Post by rmel »

My top is a refab. but on the original frame. I am not sure what the material is but
looks very similar to DuPont Corian type synthetic material used for counter tops.
Comes in many colors, thicknesses, and X-Y sizes -- ain't cheap but very durable.
If you have the original frame you could go that route with a synthetic material,
using edging and cutting tools that the counter top guys use.

Well there's also Marble and Granite :P
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
whitesik
United States of America
Posts: 223
Joined: Thu Apr 02, 2015 2:11 pm
Location: Indiana, U.S.A.

Re: WTB 710K Table and/or hardware

Post by whitesik »

Thanks both of you.
I do not have the frame/support hardware. My thoughts are to put a battery box on the left side similar to the Austrian K configuration and try to find some hardware or fab something to support the table.

Keith
75 Swiss 710K
Not so new owner but still a novice
W9YG
whitesik
United States of America
Posts: 223
Joined: Thu Apr 02, 2015 2:11 pm
Location: Indiana, U.S.A.

Re: WTB 710K Table and/or hardware

Post by whitesik »

So another year has gone by and I still have not obtained a table or hardware for my 710K. I have had a couple possible leads and some who have sent dimensions but no product. Time has not allowed me to pursue making something; retirement may help that problem. But, I thought I would post this up again to see what was out there.
Thanks!
75 Swiss 710K
Not so new owner but still a novice
W9YG
User avatar
rmel
United States of America
Posts: 1395
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: WTB 710K Table and/or hardware

Post by rmel »

SAV may have used tops and hardware https://swissarmyvehicles.com/pinzgauer ... ar-k-model

Looks like the WEB design changed and frankly I don't like it. Much harder to find what your looking for IMHO ://
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
User avatar
mm58
United States of America
Posts: 231
Joined: Tue Sep 25, 2012 10:49 pm
Location: Tucson, AZ

Re: WTB 710K Table and/or hardware

Post by mm58 »

OP: I have the table set up in my K now if you desire any dims or photos
Mike

'76 710K
whitesik
United States of America
Posts: 223
Joined: Thu Apr 02, 2015 2:11 pm
Location: Indiana, U.S.A.

Re: WTB 710K Table and/or hardware

Post by whitesik »

Well yet another year has passed and still no table. Life and other projects have hindered my Pinz improvements but now it is time to get back to it so I am posting this up again. I am looking for a complete table or any hardware for the 710k table; Swiss or Austrian. I see so many photos of interior upgrades/camper mods that it is hard to believe somebody does not have one in their shop somewhere.
Thanks!!
75 Swiss 710K
Not so new owner but still a novice
W9YG
User avatar
Mr Zero
United States of America
Posts: 183
Joined: Fri Dec 11, 2009 1:28 pm
Location: Nevada

Re: WTB 710K Table and/or hardware

Post by Mr Zero »

I've got a K table and hardware for you. If you're still looking, shoot me a PM.
Jason @battlebornpinzgauer
[1975 Pinzgauer 710K 2.7L EFI, 1972 700AP Haflinger Pathfinder]
User avatar
djw
United States of America
Posts: 306
Joined: Mon Feb 27, 2012 5:00 pm
Location: Colleyville, TX

Re: WTB 710K Table and/or hardware

Post by djw »

There is a table in my Austrian 710K. If you need dimensions or anything I may be able to help, but it is not for sale.
'74 710K (ÖBH Austrian Rehab) mostly unmolested original - the unicorn (everything works!)
collecting pinz docs since 2012 - pm me if I can help
Post Reply